H110TM-ITX R2.0 Linux
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6361
Printed Date: 29 Jul 2025 at 10:49pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: H110TM-ITX R2.0 Linux
Posted By: michaelvv
Subject: H110TM-ITX R2.0 Linux
Date Posted: 17 Oct 2017 at 11:29pm
|
" rel="nofollow - Hi. Bought this motherboard with an Intel Kaby Lake i5-7600T CPU. When I tried to boot Linux from USB drive (ubuntu 17.10 , ubuntu 17.04 , Arch Linux) it just show the boot menu and after 3-5 sec it shutdown. I have a sufficient PSU and Kingston Memory, so I suspect there are some compatible problems. As YOUR DON'T have a newer BIOS , 1 year old, I really can't do any upgrade here. ANY SUGGESTIONS here before I return the motherboard ??? Thanks Michael. |
Replies:
Posted By: michaelvv
Date Posted: 18 Oct 2017 at 3:50am
|
Tried everything.. I have the newest bios version 1.10 Secure Boot - Off CMS enabled Legacy mode etc etc. Even a fresh linux 4.13.x installed SSD just don't boot. If There is a little tip then I need to know it, running out of options. |
Posted By: ASRock_TSD
Date Posted: 20 Oct 2017 at 11:12am
|
Dear Michaelvv,
Thank you for choosing ASRock.
Regarding your case, we have tested in our lab, can boot up into Ubuntu 16.04 in UEFI mode properly. This is our system configuration: CPU: i5-7600T RAM: Kingston KVR21S15D8/8 BIOS: P1.10 (Default setting)
Please use Ubuntu 16.04 and boot up in UEFI mode to try.
Thank you! Yours truly, ASRock TSD |
Posted By: michaelvv
Date Posted: 20 Oct 2017 at 2:03pm
|
" rel="nofollow - hi. I have managed to Use the Board on a ubuntu 17.04 server, If I disabled the power management in the BIOS. Writing on the Ubuntu thread here : https://ubuntuforums.org/showthread.php?t=2374647 It's a well known thing that Kaby Lake requires at least kernel 4.10 for stable operation under linux so ubuntu 16.4 is absolutely a no go. I'll keep this post updated. Right now I'm test mode running on my new board. |