AMD Motherboards - X399 taichi Spread spectrum

Print Page | Close Window

X399 taichi Spread spectrum

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6369
Printed Date: 27 Dec 2024 at 4:06pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: X399 taichi Spread spectrum

Posted By: ssateneth
Subject: X399 taichi Spread spectrum
Date Posted: 19 Oct 2017 at 8:40am

" rel="nofollow - Does the "Spread Spectrum" setting exist on the X399 Taichi somewhere? I combed through the UEFI and didnt see it, but I could also be blind too. My bus speed is dancing around all over between 99-101MHz, so wanted to see if I could disable spread spectrum.

Replies:

Posted By: parsec
Date Posted: 19 Oct 2017 at 5:56pm

ssateneth wrote:

" rel="nofollow - Does the "Spread Spectrum" setting exist on the X399 Taichi somewhere? I combed through the UEFI and didnt see it, but I could also be blind too. My bus speed is dancing around all over between 99-101MHz, so wanted to see if I could disable spread spectrum.

If a Spread Spectrum option existed in your board's UEFI/BIOS, it would be in the OC Tweaker screen.

I don't have your board, and UEFI updates are not always updated in the manual. Can you set the BCLK rate to 100.0 MHz with the Hyper BCLK engine your board has?

-------------
http://valid.x86.fr/48rujh" rel="nofollow">

Posted By: ssateneth
Date Posted: 29 Oct 2017 at 10:51am

Sorry about long reply. The refclk option seems to be ignored. I set it to 101 or 99 or 120 or 90, its ignored and always sets to 100 actual refclock (plus/minus the fluctuations)