Intel Motherboards - X99M with GSkill F4-3000C15Q-16GRR

Print Page | Close Window

X99M with GSkill F4-3000C15Q-16GRR

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=637
Printed Date: 05 May 2024 at 9:42am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: X99M with GSkill F4-3000C15Q-16GRR

Posted By: oakley
Subject: X99M with GSkill F4-3000C15Q-16GRR
Date Posted: 13 Aug 2015 at 8:47pm

Hi everybody,

I have a problem with my X99M Killer running F4-3000C15Q-16GRR from GSkill.

When enterin gthe URFI Bios all four slots are recognized but only with 2133. Normally I ought to have 3000 right?

I already did a bios update to 2.0 with the same results.

When I try to load the XMP 2.0 adjustments the board freezes during boot at code bd .

On 2133 everything works fine and the system is booting without problems.

Since I am runnung win 7 on that machine on an Ultra M2, could I perhaps deactivate the UEFI and get over to the legacy bios?

Thanks for helping me !!!

Best regards...

Mirko

Replies:

Posted By: sexpot
Date Posted: 14 Aug 2015 at 1:56am

Hey there, your ram is capable of supporting 3000mhz, however, for the systemboard it may not support that speed out of box. You will need to do some tweaking with memory dividers (125 strap or 100 strap) as well as dram voltage and vccsa. Also, you need to factor in the CPU IMC whether or not it will handle that speed. Since this x99 officially supports 2133mhz ram, anything higher is considered an overclock and not guaranteed.