I just put together my new X399 Taichi system with a 1920x CPU and windows 10.

Havent had any issues installing drivers or software except with the ASRRGBLED which keeps BSOD the system and the A-Tuning software which when trying to open will launch an error windows.

Saying: Access violation at address 0000FFFF. Read of address 0000FFFF.

Can anyone help me? Would be great if both software run, but for the moment I will concentrate on the A Tuning as I want a way to control Fan Speeds and temps.

Thanks.

2. Try this A-Tuning version (3.0.174)

http://asrock.pc.cdn.bitgravity.com/Utility/A-Tuning/A-Tuning" rel="nofollow - http://asrock.pc.cdn.bitgravity.com/Utility/A-Tuning/A-Tuning (v3.0.174).zip

 

But yeah, that's what I meant with update 

System is used for rendeing and RAM is pretty much running max out usage wish 98%, settings wise is not overclocked using XMP profile and system runs pretty stable.

Ill run a memory test if you want, what software would you suggest? Memtest?

Thanks in advance.

https://www.techpowerup.com/memtest64/

and OCCT

http://www.ocbase.com/index.php/download

BTW - on W10 x64, Fall CU I assume?

Update:

I know that A-Tuning should not be compatible with the X399 FPG but I tested it anyway (should error out on initialisation, but not with the access violation) and guess what --- the exact same access violation error. My Rig is rock-stable 24/7 (except some early quirks with Vega which are now solved).

Care to test the F-Stream tuning on your board?

http://asrock.pc.cdn.bitgravity.com/Utility/F-Stream/F-Stream(v3.0.173).zip

This is what I use personaly (and RyZEN Master for TR). Theoretically not compatible with Taichi, but since our boards are 90% same.... test it 

Am rendering right now, so Ill do memory tests once finished.

I tried the F-stream version you linked and the exact same access violation error. #

EDIT

OK so I tested using the software above, Memtest and OCCT multiple times and all the reports come back OK. I really dont know whats up with the software.

A-Tuning is a buggy software and it requires that Ultra Fast Boot needs to be disabled in UEFI to work normally, which is in my opinion just stupid.

http://forum.asrock.com/forum_posts.asp?TID=5934&KW=A-Tuning&PN=3&title=fstream-tuning-access-violation-error-on-x370-itx

http://forum.asrock.com/forum_posts.asp?TID=6051&KW=A-Tuning&PN=3&title=gskill-trident-z-rgb-rgb-not-functional

I dont have Ultra Fast Boot enable, and whether the software is buggy or not, I should at least be able to run it, and get the RGB or others work, if not, thats no my faulty for asking else where since so many people are having this issue and is not resolved but just turning on CSM.

If there isnt a solution soon, Ill change board, I like to control fans by PWM and lights on OS.

It is not acceptable that you buy an expensive mobo and cant get their main software working from the get go.

Unacceptable Asrock.

It's not your hardware/software fault, so debugging it will not help, and You will just waste your time like I did.

1.  A-Tuning , disabling Ultra fast boot, switching to CSM should work, try to shut off your PC completely with removing power cord for 1 min. , 3.0.160 ver. works for me with 1.70 Bios.

2.  Newest ASRRGBLED bsods for me too, but previous version works ok (don't remember it's number)

This is just a bit newer platform than x299 and have a lot of early problems, which could be resolved in time,  seems that number of testers is too small for now. 

Some problems like these with G.Skill RGB rams are more complicated and involve different vendors (all platforms are affected) I would never buy this RGB products if I knew that cannoct control it or just switch it off.

The point is that we are not informed if any problem will be resolved or even if is known so far. Probably Asus is less buggy with with his Aura platform (one to cotrol them all) but only probably ...

Will just have to wait I guess not the best of excuses to have your own software not working under the latest OS, but yeah.

I have no way of controlling the Fans, pumps and temps read, which the most fustrating.... it just marketing dont sell the board with capable features if they dont work for loads of people, that was my point.

Not trying to be a dikc, I do appreciate all the answer and help.

Thanks, havent been on AMD platform for a while, but after spending all this money and seeing it run very rough under just Windows OS, its made me see this platform will take forever to be optimized, which isnt Asrocks issues anyways,

http://www.uefi.org/sites/default/files/resources/Brian_Richardson_Intel_Final.pdf" rel="nofollow - http://www.uefi.org/sites/default/files/resources/Brian_Richardson_Intel_Final.pdf