ASrock FM2A88m-HD 3.0 ports don't work
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=649
Printed Date: 22 Dec 2024 at 6:48pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ASrock FM2A88m-HD 3.0 ports don't work
Posted By: brother
Subject: ASrock FM2A88m-HD 3.0 ports don't work
Date Posted: 15 Aug 2015 at 7:31am
|
Hi, I just built this new system running Win 7 32bit. Everything is running fine except the 2- 3.0 USB ports. I loaded the drivers off the dvd and nothing, I have a 3.0 external hard drive and a 3.0 flash drive to test these with. All of the 2.0 ports work Any help would be appreciated. A10 7700K AMD CPU 8gb AMD 1600 DDR3 1T WD SATA DRIVE |
Replies:
Posted By: parsec
Date Posted: 15 Aug 2015 at 11:01am
|
So I assume when you connect your USB 3.0 flash drive and USB 3.0 external hard drive to the USB 3.0 ports, nothing happens at all? Which USB 3.0 ports are you using the two on the board's IO panel, or the ones from the USB 3.0 header on your board, connected to a PC case? What do you see in Device Manager for the USB 3.0 ports? ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
Posted By: brother
Date Posted: 15 Sep 2015 at 4:18am
|
Update, The rear 3.0 ports do not work with a 2.0 flash drive-no power- nothing I plug in a 3.0 external drive into the rear 3.0 port and it gets power but is invisible. Device manager says everything is working fine. I installed a 3.0 ext. port dual cable from the mother board port and it works fine. Sorry it took so long. I'm back on the fix now. Any help is appreciated. Ken |
Posted By: brother
Date Posted: 15 Sep 2015 at 4:23am
|
Ok. I fixed it, a driver download was needed now it works... Thanks ken |