z270 Extreme4 LED problem
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6562
Printed Date: 30 Jul 2025 at 2:47pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: z270 Extreme4 LED problem
Posted By: BigRoberto
Subject: z270 Extreme4 LED problem
Date Posted: 10 Nov 2017 at 8:08am
|
" rel="nofollow - I have just setup my |
Replies:
Posted By: ASRock_TSD
Date Posted: 10 Nov 2017 at 11:24am
|
Dear BigRoberto,
Thank you for choosing ASRock.
Regarding you case, please set the AURA RGB LED disable,
save the configuration and reboot the system. After system boot up, enable the
AURA RGB LED and check if all the RGB LED on the motherboard is on. If still not work, please try to install the
ASRock RGB LED utility under Windows, it will flash the RGB LED firmware. Download link: http://asrock.pc.cdn.bitgravity.com/Utility/Others/RGBLED%28v1.0.29%29.zip" rel="nofollow - http://asrock.pc.cdn.bitgravity.com/Utility/Others/RGBLED(v1.0.29).zip About the red LED, its BIOS selection LED, will
show which BIOS ROM is using right now. This LED cannot be close, please understand it.
Thank you! Yours truly, ASRock TSD |
Posted By: BigRoberto
Date Posted: 10 Nov 2017 at 2:45pm
Thanks, installing ASRock RGB LED in Windows fixed the problem.
 |
ASRock_TSD wrote: