Asrock AB350 Pro 4 gives 3 beeps and wont boot
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6569
Printed Date: 27 Dec 2024 at 11:43am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Asrock AB350 Pro 4 gives 3 beeps and wont boot
Posted By: hattutemppu
Subject: Asrock AB350 Pro 4 gives 3 beeps and wont boot
Date Posted: 11 Nov 2017 at 5:44am
" rel="nofollow - My set up is:
Issue is that it wont boot properly. 3 beeps. Fans work (chassis + cpu). Keyboard won't light up. HD light does not react. After sometime (~30s) it reboots and does the same things again. Monitor never gets a signal. What is the issue? Only thing I can think of is the RAM (but even without it I get 3 beeps). However RAM should be compatible according to the AMD and Kingston. What should I do? Edit: I have tried swap single RAM sticks, boot with minimal amount of stuff connected and replugging everything. EDIT 2: SOLVED |
! You have to A) not be an idiot and B) push those RAM sticks way harder than you would think. Medium push snaps the locks and sound like it should do the trick, but you really have to force those suckers in there! I have build few PC's since 1998 and this is the first time I have had this issue. Either slots have become tighter or I have become weaker 
but I hope this post helps anyone that might have the same issue. Replies:
Posted By: 88Ben88
Date Posted: 18 Feb 2018 at 9:35pm
| " rel="nofollow - Thank you so much! I spent hours looking through conversations trying this and that to fix my problem. I stumbled on to yours and thought ?œno way its that simple.?? Yep, it was that simple. The lock clicked in place but I still had not pushed hard enough to get the memory all the way in there. System boots up fine now! |
Posted By: thankshattutemppu
Date Posted: 10 May 2019 at 2:47am
| Thanks hattutemppu! This worked for us too! |
Posted By: andizsofi
Date Posted: 24 Sep 2019 at 3:11am
| Same here, thank you very much!! :) |