Which Drivers Are Necessary?
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6606
Printed Date: 27 Sep 2024 at 7:51pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Which Drivers Are Necessary?
Posted By: wussery
Subject: Which Drivers Are Necessary?
Date Posted: 15 Nov 2017 at 4:03am
|
I just purchase a Fatal1ty AB350 Gaming-ITX/ac board. On the ASROCK website there is an allin1 driver for this motherboard and several other drivers for network, sound and other devices. Will the allin1 driver suffice or do I need to install the other drivers listed for this board. I purchased an AMD RYZEN 5 1600, an EVGA GeForce GTX 1060 SC GAMING, ACX 2.0 and G.SKILL TridentZ Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) |
Replies:
Posted By: SoniC
Date Posted: 15 Nov 2017 at 4:24am
|
Download the chipset drivers directly from AMD site. The latest one comes with the energy profiles for RyZEN etc. Soundcard (Realtek) drivers are a must -- if you want to use the internal one. Realtek LAN is nice to have, but windows comes with pre-baked ones - so this one optional in case you wanty to have low latency, some fixes etc. Plus if you want to use some addiional audio gimmicks you may want to install the SB Cinema. And of course GeForce drivers. ------------- -=SoniC=- TR x1950, ASRock X399 FPG (v. 3.33A), G.Skill 3200 CL14 64GB, Enermax LiqTech 280, AMD Vega 64 LC, 10x HDDs (mostly Hitachi), 2x M.2 (970EVO,960Pro), Xonar DX, AX1200i PSU |
Posted By: MisterJ
Date Posted: 15 Nov 2017 at 4:25am
|
wussery, please get your AMD drivers here: http://support.amd.com/en-us/download" rel="nofollow - http://support.amd.com/en-us/download I use the right side. The all-in-one are not really and should not be used. You should only need the other drivers as your board needs. Also DL the drivers for your video card. If you need to post again, please post a complete list of your specifications as I have in my signature. Please include the OS and BIOS versions and power supply. Enjoy, John. ------------- Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD |
Posted By: wussery
Date Posted: 15 Nov 2017 at 6:37am
|
Thanks for the information on the drivers. I will update my profile after I configure my components. They are on the way from Newegg. |
Posted By: datonyb
Date Posted: 15 Nov 2017 at 8:04pm
|
if you are using a sata hard drive please note the amd driver DOES NOT automatically install after running the amd install program manually go into the device manager and attempt to manually point driver update for the ide.atapi controllers one by one (you might have 2-3) to the amd folder, one of these will then load the amd driver and relabel itself an AMD device ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: datonyb
Date Posted: 15 Nov 2017 at 8:07pm
|
" rel="nofollow - as a side note did you order the gskill tridentz 3200 in either the cl15 or cl14 timings ? these are the nice ones with samsung b dies for chips the 3200 cl16 tridents are not so nice with ryzen ........ ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: SoniC
Date Posted: 16 Nov 2017 at 12:43am
+1 Hynix = bad for TR. It's ok-ish for RyZEN after AGESA 1.0.0.6, should be no problem to reach 3200 stable on two modules, even on 4 modules with some tweaking. ------------- -=SoniC=- TR x1950, ASRock X399 FPG (v. 3.33A), G.Skill 3200 CL14 64GB, Enermax LiqTech 280, AMD Vega 64 LC, 10x HDDs (mostly Hitachi), 2x M.2 (970EVO,960Pro), Xonar DX, AX1200i PSU |
datonyb wrote:Posted By: wussery
Date Posted: 16 Nov 2017 at 2:59am
|
Yes, I did order a 2TB sata drive with this install. I also ordered a 256gb SSD for my boot drive. Thanks for the heads up on loading the other drivers. This should be a very interesting build. |
Posted By: wussery
Date Posted: 16 Nov 2017 at 3:04am
In my effort to save a few coins I purchased these timings, so I may be SOL with respect to overclocking:
|
Posted By: wussery
Date Posted: 16 Nov 2017 at 3:22am
|
One other note, before I purchased my g.skill chips I consulted the memory compatibility page on ASROCK. I found these chips had been verified to work with the motherboard that I purchased. DDR4, 2933, 8GB, GSkill, F4-3200C16D-16GTZB, SS, 2PCS, V I recognize that there is no guarantee that I will be able to overclock these memory chips, but I wanted to make sure that I was using verified chips to start with. G.SKILL TridentZ Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) |
Posted By: datonyb
Date Posted: 16 Nov 2017 at 4:22am
|
we may be able to help you with them anyways the ram issue has advanced a lot since release ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: SoniC
Date Posted: 16 Nov 2017 at 5:40am
|
One is definitely Hynix (the 2933 CL16 model) and the other one is probably Samsung B-Die. No problem to get those working with the timings they were meant for. Both of them. Like I've said (and datonyb too) - a lot has changed since the introduction of AGESA 1.0.0.6. Just be sure to update to the latest UEFI (do NOT flash under Windows -- copy on the USB drive, go into UEFI, reset to default values, reboot into UEFI, flash within UEFI). I would propose to just load the XMP profile and see if the system boots and is stable with the XMP profile in RAM. If you are lucky (90% chance you are I would say) then it should work "just like that". Of course they is a lot of playroom to tweak it, but first step would be to get it rock-stable, and move further onwards :-) ------------- -=SoniC=- TR x1950, ASRock X399 FPG (v. 3.33A), G.Skill 3200 CL14 64GB, Enermax LiqTech 280, AMD Vega 64 LC, 10x HDDs (mostly Hitachi), 2x M.2 (970EVO,960Pro), Xonar DX, AX1200i PSU |
Posted By: datonyb
Date Posted: 16 Nov 2017 at 7:38am
|
tridentz 3200 cl16 is hynix A die single sided single rank the ram calculator should help get them running tidy hopefully at 3200 ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |