X370 itx Fatal1ty P-state problem
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6652
Printed Date: 28 Dec 2024 at 4:11am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X370 itx Fatal1ty P-state problem
Posted By: namn454
Subject: X370 itx Fatal1ty P-state problem
Date Posted: 20 Nov 2017 at 11:43pm
|
Hi! I have the Fatal1ty X370 itx board with latest bios and 1800X. I have a weird problem with P-states. Pstate 0 I have changed only DID to 4000mhz so therefore running it on custom. All other states are disabled. Haven't touched to VID or FID. I'm running 50mV offset and voltage and frequency are on AUTO in OC Tweaker. Every second time when I boot my pc I get 1.388V as VID. Every second time I get 1.43V!!! HWinfo and Ryzen master have the same voltage so its real. The issue persists. No matter how many times I boot my pc every second time its 1.388V and the next boot back to 1.433. A very weird issue! Could anyone help me?  |
Replies:
Posted By: datonyb
Date Posted: 21 Nov 2017 at 12:07am
|
i suggest either setting did AND vid in same box or just use oc tweaker tab to set multi and voltage (top section. leave lower section cpu volts to auto) ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |