Where is the error?
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6734
Printed Date: 28 Dec 2024 at 9:40am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Where is the error?
Posted By: jjoshua2
Subject: Where is the error?
Date Posted: 27 Nov 2017 at 11:22pm
|
" rel="nofollow - x399 professional g.skill 4x8gb ddr4-3200 cas 14 trident z Mobo came with bios 1.4 and booted fine with all 4 sticks, but memtest7 only showed 16g. So I flashed to bios 1.8 and it wouldn't boot up with anything in either D1 or D2, but I was able to get it to work with 3 sticks even at xmp and memtest stable overnight, which now saw 24g with the bios update. I flashed to 1.7 due to another guys post here who had a similar problem with 1.8, and it boots up and the bios sees quadruple channel memory, but memtest still only sees 24g. I flashed with just two good sticks back to 1.8 and still the same state as before. It seems to be either a bad MOBO or bios. I can swap out sticks and any work fine on 6 of the slots, but none work in the d1 and d2 slots it seems. When it is stuck in a boot loop it seems to be error code c0. Not sure what to do or whose fault it is; I guess it could be cpu but I'm thinking mobo, so I sent asrock technical support an email. Should it boot with just 1 stick in d1 or d2?
|
Replies:
Posted By: jjoshua2
Date Posted: 27 Nov 2017 at 11:31pm
| " rel="nofollow - It doesn't boot with just 1 stick in d1 or d2, but does with just 1 stick in c2 on the 1.8 bios. Tested 1.7 bios same deal. So RMA the motherboard? or CPU too? |
Posted By: datonyb
Date Posted: 28 Nov 2017 at 12:44am
|
remove and reseat the cpu ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |