Bios 2.0 released for x399
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6746
Printed Date: 28 Dec 2024 at 9:39am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Bios 2.0 released for x399
Posted By: JUANNY
Subject: Bios 2.0 released for x399
Date Posted: 28 Nov 2017 at 10:48pm
|
Just noticed the new bios but Im holding off until others had a chance of seeing if it has anything worthwhile in it to warrant upgrading from 1.8 ------------- Asrock X399 Fatality Pro Gaming Bios 2.0 Threadripper 1950X Cpu cooler Enermax 360 mm TR4 GSkill 64 GB F4-2933C14Q-64GFX Windows 10 X64 PRO Version 1709 Build 16299.19 2X EVGA 1080 TI in SLI mode |
Replies:
Posted By: SoniC
Date Posted: 29 Nov 2017 at 2:07am
|
Nothing really new, I have already mentioned the BT on/off switch in one of the forum posts (analysed the beta Taichi 2.0 BIOS), they have fixed the AGESA string (I think for Taichi, cause it was ok for FPG), and fixed an issue with SATA M.2 SSDs. That's it.... nothing related to memory improvements/compatibility. ------------- -=SoniC=- TR x1950, ASRock X399 FPG (v. 3.33A), G.Skill 3200 CL14 64GB, Enermax LiqTech 280, AMD Vega 64 LC, 10x HDDs (mostly Hitachi), 2x M.2 (970EVO,960Pro), Xonar DX, AX1200i PSU |
Posted By: JUANNY
Date Posted: 29 Nov 2017 at 2:23am
|
Why did they change the temp source reporting in hwmonitor and drdebug from tdie to tctl. Hate doing the 27c offset math. Everything and their grandmother use tdie to gauge where the temps are at ------------- Asrock X399 Fatality Pro Gaming Bios 2.0 Threadripper 1950X Cpu cooler Enermax 360 mm TR4 GSkill 64 GB F4-2933C14Q-64GFX Windows 10 X64 PRO Version 1709 Build 16299.19 2X EVGA 1080 TI in SLI mode |
Posted By: daddyo
Date Posted: 29 Nov 2017 at 3:13am
" rel="nofollow -
Just curious, What do you do with 10 drives on your box? and are you using the RAIDXpert? I found it terrible to configure. I couldn't configure my OS on a single drive and have my other drives in RAID...
|
SoniC wrote:Posted By: SoniC
Date Posted: 29 Nov 2017 at 6:48am
" rel="nofollow -
Heh, these are not in the RAID ;] I don't have any problems... TBH --- I also have an extension SATA-controller card on PCIe x4 for the rest.... like DVD-RWs... (Because X399 FPG cannot do >8SATAs +needs x4 PCIe (for reliable performance) controller for x2 SATA+ vs x370 FPG with x10SATAs and only a cheap x1 PCIe controller for 2 SATAs+ ;-) ) And the X399 MoBo is more expensive... LoL.... not THAT happy actually.... silly decision ASRock.... SILLY!) Anyway--- These are a data storage for my whole flat (and a central media service). Since everything is running 24x7 anyway (a lil of mining there... etc ;-) ) then - why not? And no RAID needed... if one of the HDDs goes... well... pity ;-) I swap them on a yearly basis (for bigger ones) anyway :-) And I'm against cloud-services etc. because of privacy and... well... you just upload and hope for the best.
------------- -=SoniC=- TR x1950, ASRock X399 FPG (v. 3.33A), G.Skill 3200 CL14 64GB, Enermax LiqTech 280, AMD Vega 64 LC, 10x HDDs (mostly Hitachi), 2x M.2 (970EVO,960Pro), Xonar DX, AX1200i PSU |
Posted By: lowdog
Date Posted: 29 Nov 2017 at 7:06am
My sentiments exactly...why the hell Tctl.....should have left it Tdie....practically all other programs use the Tdie sensor so why change it.  ------------- X399 Fat Pro Gaming bios 3.10 - TR4 1900X - 64GB G-SKILL TridentZ F4-3200C14Q-64GTZ @ 3133MHz - Vega 64 AIO with EK block - WC Custom loop - 1500W Silverstone PSU - yay |