Intel Motherboards - Ram slots a1 and b1 have booting problem

Print Page | Close Window

Ram slots a1 and b1 have booting problem

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6851
Printed Date: 01 Aug 2025 at 5:28am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Ram slots a1 and b1 have booting problem

Posted By: snl678
Subject: Ram slots a1 and b1 have booting problem
Date Posted: 07 Dec 2017 at 1:03pm

" rel="nofollow - Hi I just built a system lately. I have a dual channel 32 gb ram. If I install the ram on a2 and b2 slots it works properly, but when ever I install them on a1 b1 slots I get error message saying ?�The system failed to boot several times before??then it counts down and starts windows normally. I tried single stick ram on each slot and I only get this message on a1 and b1. The ram speed is 3200 if that helps. The system was working fine on a1 b1 when I tested out before connecting everything. Have clean installed windows and have updated the bios too. Any suggestions or ideas? Thanks in advance.

Replies:

Posted By: snl678
Date Posted: 12 Dec 2017 at 3:01pm

Any help :(