ab350m pro4 and wd black m.2 pcie not working
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6884
Printed Date: 10 May 2024 at 8:33pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ab350m pro4 and wd black m.2 pcie not working
Posted By: eddiegzz
Subject: ab350m pro4 and wd black m.2 pcie not working
Date Posted: 10 Dec 2017 at 2:35am
|
I've tried all the tricks but i just can't seem to get my motherboard to recognize the ssd. I installed it on another pc, it wont let me use it but it at least shows up in the device manager. Had to install winodows this pc using another hdd in the mean time. Please help!
|
Replies:
Posted By: MisterJ
Date Posted: 10 Dec 2017 at 4:38am
eddiegzz, so little information - can only guess. Please post all your specifications in your signature as I have, including versions of your OS and BIOS. Open your BIOS hit F9 then F10 and see if that helps. Enjoy, John.
-------------
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
Posted By: eddiegzz
Date Posted: 10 Dec 2017 at 6:19am
Thanks for the reply John. I updated my signature as you can see. I'll try F9 and then F10.
-------------
AB350M Pro4, Ryzen 1500X, WD Black m.2 PCIE 256gb, G SKill Trizent Z RGB 3000GHZ, WIndows 10 X64 Pro, EVGA 450BT, Enermax ETS-N31, EVGA GTX 1060 6GB SC, BIOS 4.10, 1TB Firecuda
|
Posted By: eddiegzz
Date Posted: 10 Dec 2017 at 7:01am
Didn't work. That just resets the bios settings. I had installed this m.2 on another pc and i couldnt figure out how to get it to work but it did show up on disk management. This is getting very frustrating
-------------
AB350M Pro4, Ryzen 1500X, WD Black m.2 PCIE 256gb, G SKill Trizent Z RGB 3000GHZ, WIndows 10 X64 Pro, EVGA 450BT, Enermax ETS-N31, EVGA GTX 1060 6GB SC, BIOS 4.10, 1TB Firecuda
|
Posted By: donalgodon
Date Posted: 10 Dec 2017 at 9:31am
|
The Sata 3 port shares the same bus as the m.2. Move the Sata connector and it will be recognized.
I had the same problem.
It is in the manual, but I never noticed it until I tried to install an M.2 ssd.
|
Posted By: eddiegzz
Date Posted: 10 Dec 2017 at 9:35am
The ultra m.2 slot uses pcie not sata. I plugged it in to the sata m.2 to check if it was just the slot not working but that didn't work either. It just doesnt want to read the m.2 slots. If anyone knows how to force it do so it'd be a great help
-------------
AB350M Pro4, Ryzen 1500X, WD Black m.2 PCIE 256gb, G SKill Trizent Z RGB 3000GHZ, WIndows 10 X64 Pro, EVGA 450BT, Enermax ETS-N31, EVGA GTX 1060 6GB SC, BIOS 4.10, 1TB Firecuda
|
|