Intel Motherboards - Z370 Taichi no post with i5 8600k

Print Page | Close Window

Z370 Taichi no post with i5 8600k

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7013
Printed Date: 03 Aug 2025 at 1:22am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Z370 Taichi no post with i5 8600k

Posted By: Hobbs64
Subject: Z370 Taichi no post with i5 8600k
Date Posted: 20 Dec 2017 at 7:04am

Hello

Brand new build with an i5-8600k, Z370 Taichi and Vengeance LPX DDR4 3200 16GB and I am unable to get to the bios. Dr Debugger is cycling through 00 15 30 C4 error codes.

I have reinstalled the CPU, reinstalled the memory multiple times and moved it to difference slots as well and reset the CMOS - same result.

Help me Obi Wan Kenobi - you are my only hope.

Replies:

Posted By: geraldleb
Date Posted: 05 Feb 2018 at 4:56am

I just had a similar problem with the same components. Only difference was I got the error code A2 or A6 on Dr. Debug. I am RMAing the mobo. Let's stay in touch and see if we can get our builds to work!

Posted By: Animalm4st3r
Date Posted: 05 Feb 2018 at 8:16pm

" rel="nofollow - Have u tried using only one RAM Stick?
Have u checked if your ram is on the QvL list?

Posted By: gman737
Date Posted: 06 Feb 2018 at 12:43am

I had a similar issue when I first started up my build. Try clearing the CMOS again. It's important to note that you have to fully disconnect power when you clear CMOS for it to work.

I seem to recall that I had to be patient and wait a couple minutes the first boot as well.

Posted By: backplate
Date Posted: 10 Feb 2018 at 11:41pm

Hello,
a you pay attention to the slots of the ram it seems to me that they must not touch each other if they are two, slot1 and 3 or slot2 and 4.....

https://imgur.com/cTZGsBN" rel="nofollow - https://imgur.com/cTZGsBN

Excuse my poor English, I speak French..
good afternoon