AMD Motherboards - x399 Wont Post

Print Page | Close Window

x399 Wont Post

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7043
Printed Date: 18 Jul 2025 at 7:25pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: x399 Wont Post

Posted By: testUser001
Subject: x399 Wont Post
Date Posted: 23 Dec 2017 at 10:53am

Just finish building this pc, but it wont post. The video card turns on, the radiator turns on, but no fans turn on (other than the video cards). Dr Debug goes through a few numbers then eventually stops on 65 the chipset initialization error. I have tried booting with a ram stick in A2, two sticks in A2 B2, and 4 sticks A2 B2 C2 D2 all with the same result.

Replies:

Posted By: testUser001
Date Posted: 23 Dec 2017 at 6:36pm

Ram is Gskill TridentZ f4-3200c14d-16gtzkw

I unplugged the hard drives and got the same result.

Posted By: MisterJ
Date Posted: 24 Dec 2017 at 12:40am

" rel="nofollow - testUser001, here is a link to the debug codes: http://forum.hwbot.org/showthread.php?t=16017
65 - CPU DXE initialization (CPU module specific)
I would suggest you carefully check your CPU installation. Make sure the 4-pin and the 8-pin CPU power connectors are connected properly (not rotated) and that the connectors are CPU and not PCIe. It is hard to make much further guesses with so little information. Please post all your specifications in your signature as I have including BIOS version. If you can boot into BIOS, please hit F9 then F10. Enjoy, John.

-------------
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD

Posted By: testUser001
Date Posted: 24 Dec 2017 at 1:23am

I solved the issue already, it was my cpu fan pin connector not being pushed in all the way.