ab350 fatal1ty k4 RGB issues?
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7112
Printed Date: 23 Sep 2024 at 5:52pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ab350 fatal1ty k4 RGB issues?
Posted By: Mytre
Subject: ab350 fatal1ty k4 RGB issues?
Date Posted: 30 Dec 2017 at 12:35am
" rel="nofollow - Hello, i have a ab350 fatal1ty k4 motherboard with a ryzen 1600x. and I have this weird issue with my rgb, I have seen videos of people using the same rgb strip on other motherboards doing smooth color changes. However on my motherboard, it is not smooth, it looks weird, it changes colors without any smoothness, just changes colors and that's it , and when doing the breathing you can see how it stops each second to change to a lighter tone. not smooth at all. https://www.amazon.com/SilverStone-Technology-Mystic-BIOSTAR-LS02/dp/B01MV46VAF this is the rgb I have . I am using the asrock app from windows and I can see the change. I also have an 1070 from evga with rgb and its rgb its way smoother and the breathing effect much nicer. Is this an issue with the motherboard rgb header ? is it supposed to be like that? .
|
Replies:
Posted By: zlobster
Date Posted: 30 Dec 2017 at 2:38am
Same with my X370 Taichi. The 'breathing' RGB effect is looks very bad. The transition is not smooth at all.
-------------
1700X ZP-B1 (stock); X370 Taichi (UEFI 3.10); 16GB F4-3200C14-8GFX XMP; 256GB 960 EVO; RX 580 NITRO+ 8GB
|
Posted By: Mytre
Date Posted: 01 Jan 2018 at 7:12am
|
" rel="nofollow - What kind of rgb strip do you use? Is this an issue with the motherboard header? I dont know if this is the supposed behavior of that header or maybe I need to do an rma .
|
Posted By: zlobster
Date Posted: 01 Jan 2018 at 8:29am
I used a few no-name, run-of-the mill strips but I've seen them perform in the store. They were on demo in the store, so I'm pretty sure I've seen them capable of smooth transitions.
As soon as I got them in my rig and the smooth transitioning was gone. I got them out shortly after. Too much bling for my taste, I just wanted to see what all the fuzz was about.
It's my belief that it's the controller on the mobo that does this, not the strips. Then again, I've never dived deeper into this issue.
-------------
1700X ZP-B1 (stock); X370 Taichi (UEFI 3.10); 16GB F4-3200C14-8GFX XMP; 256GB 960 EVO; RX 580 NITRO+ 8GB
|
|