Intel Motherboards - Pc not booting at all

Print Page | Close Window

Pc not booting at all

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7115
Printed Date: 02 Aug 2025 at 1:41am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Pc not booting at all

Posted By: perfectyuda
Subject: Pc not booting at all
Date Posted: 30 Dec 2017 at 7:03am

when i try to power on my pc nothing happen, tho all fans are spinning and seems that everything got power ,but da motherboard has only cpu led is on ,and dr.debug codes are off,they never give any number or anything .

what i've tried so far:

remove and plug every single cable to motherboard , use only 1 ram reinstall gpu and cpu to mb and made sure that everything is settled

till now nothing happening ,pc not booting and only this red led "cpu" is on

specs:

asrock formula z77 oc

gtx 780 evga

3770k intel core i7

cooler master 725 extreme psu

4x4 hyper x blue ram

appreciate any help on that matter and thank you

Replies:

Posted By: Tzvia
Date Posted: 31 Dec 2017 at 1:31am

" rel="nofollow - Has anything changed between the last time it worked and now? Make sure that you have connected everything required from the PSU (second motherboard power connector, power connectors on video card). You can also try clearing the CMOS if you have not yet done so, and booting with NO ram installed (and no video card) as the motherboard should beep the bad ram beep. If you don't get the bad-ram beep, it's not even starting a post. Most commonly, would be a PSU issue, followed by motherboard and then CPU. If nothing gets any sign of life from it, I would take it apart and assemble it on a cardboard box, and try booting with just the CPU and motherboard, listening for the bad-ram beep. This would eliminate any issue with a short to the case. If nothing, I would remove the CPU, check for bad pins, and reassemble. Being on the cardboard box makes it easier to work on it. Good luck.

-------------
Tzvia