How to restore a bricked AB350 Pro4
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7205
Printed Date: 27 Jul 2025 at 8:02pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: How to restore a bricked AB350 Pro4
Posted By: mordelismo
Subject: How to restore a bricked AB350 Pro4
Date Posted: 07 Jan 2018 at 5:40am
| I do an update but now is only black. |
Replies:
Posted By: kerberos_20
Date Posted: 07 Jan 2018 at 6:31pm
|
hi, did u check manuals on how to update your bios? http://www.asrock.com/support/BIOSIG.asp%3Fcat=BIOS8" rel="nofollow - http://www.asrock.com/support/BIOSIG.asp%3Fcat=BIOS8 see that notice at the end |
Posted By: zlobster
Date Posted: 07 Jan 2018 at 10:43pm
Link's broken, Kerb. ------------- 1700X ZP-B1 (stock); X370 Taichi (UEFI 3.10); 16GB F4-3200C14-8GFX XMP; 256GB 960 EVO; RX 580 NITRO+ 8GB |
kerberos_20 wrote:Posted By: kerberos_20
Date Posted: 07 Jan 2018 at 11:06pm
|
" rel="nofollow - bbcode is breaking it http://www.asrock.com/support/BIOSIG.asp?cat=BIOS8 |
Posted By: KrissB76
Date Posted: 02 Apr 2019 at 4:00am
|
Critism and speculation. Sadly we post for answers. My motherboard was doing a bios update with a 1000W PSU, correctly as someone asked. And the board was resetting for whatever reason, problem seemed to had gone so I tried to do a bios update from 4.90 to 5.**. I was able to read "Do Not Turn Off..." then the motherboard decided to reset... Now, again, question OP asked, over 3 months ago, still applies... Is there a fix, keep critism's and speculations to a minimum as this is a forum to help others not to slander and insult them on something they wish to fix... Every community has to be a Negative Nancy, why do you think this one should too? No I didn't use a pencil to tighten up the Flange-valve on the DDR2 adapter to be compatible with DDR4 (joke). Thanks in advance, feel like I'll have to go elsewhere considering OP's question and responses given! ------------- So critical to make a new account to ask/answer a question. Needs to be more secure than my grandma's va-jj, yet it's simple info... Password/Username phishing done by the pro's right here... |
Posted By: Xaltar
Date Posted: 02 Apr 2019 at 6:54am
|
This question has been asked and answered in countless threads on this forum but I can repeat it again here. There are only 2 options for a bricked board with a soldered BIOS ROM: 1. Return the board under warranty for replacement/repair. 2. Use an external ROM flasher with a clamp to reflash the BIOS with a working version. For the first option (which I recommend) you need to contact ASRock Tech Support here: https://event.asrock.com/tsd.asp For the second option you will need to search Youtube for a tutorial, if you do not have experience working with 3rd party external ROM programmers I would not advise this route. It requires purchasing the correct tools and a lot of research. Alternatively, you could look for a Tech that possesses the tools and knowledge to do it for you. ------------- 
|