Z370 Taichi XMP issues
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7404
Printed Date: 03 Aug 2025 at 1:22am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Z370 Taichi XMP issues
Posted By: Randallel
Subject: Z370 Taichi XMP issues
Date Posted: 23 Jan 2018 at 8:33am
| " rel="nofollow - Every time I try to enable XMP profile, my computer won't boot. I know it's not the RAM, because I have used it for another Z370 build. I've tried to install a new bios, and clean the RAM slot. Is the board defective? |
Replies:
Posted By: Yzerman19
Date Posted: 26 Jan 2018 at 3:36pm
| " rel="nofollow - I'm having xmp issues with my z370 taichi as well. Were you able to get it to run rated speed by doing the settings manually? I can't get the board to post unless I have my 3000mhz corsair set to 2800 or slower. I'm keeping it at 2700mhz just to be safe. |
Posted By: Randallel
Date Posted: 26 Jan 2018 at 4:24pm
|
" rel="nofollow - https://imgur.com/a/GKgjt Does your mosfet where I circled red have a F on it? |
Posted By: Yzerman19
Date Posted: 27 Jan 2018 at 4:39pm
| " rel="nofollow - I honestly have no idea and won't be able to check until tomorrow. Is it good or bad if it has an f on it? |
Posted By: Yzerman19
Date Posted: 28 Jan 2018 at 2:25am
| So I took a look to see if mine had an f on them. Turns out they don't. I can't really tell what symbol it is but it kinda looks like two h's in a circle. Is that a good or a bad sign lol |
Posted By: Abula
Date Posted: 28 Jan 2018 at 2:56am
|
I also own a Z370 Taichi, and dont have any issues running XMP on G.SKILL TridentZ RGB Series 32GB (2 x 16GB) DDR4 3200Mhz DIMM F4-3200C14D-32GTZR, the bios recognizes it and runs fine. One thing to mention is that AsRock has removed bios P1.4 from the website, not sure why, my guess is that the intel fix for the vulnerability was causing issues, in my case i did flash it to it, had some freezing and stalls with it, i recently return to P1.3 and all seems working correctly again, though worth mentioning the XMP worked on either bios, so maybe wont help me you. With asrock, i recommend always to use memory that has been tested already, preferable on QVL List.
|
Posted By: Randallel
Date Posted: 28 Jan 2018 at 3:45am
" rel="nofollow -
The problem isn't 3200Mhz, the problem is that it won't post if you OC your 3000Mhz. The spec page says it doesn't support 3000Mhz, not sure what that means. I had to downclock my RAM to 2933 to post. I bought a 3200Mhz kit, which works fine now. |
Abula wrote:Posted By: Randallel
Date Posted: 28 Jan 2018 at 3:49am
" rel="nofollow - [URL=][/URL]
There's 2 versions of mosfets for the Taichi, Fairchild and Sinopower. Fairchild is said to OC better, so maybe since we both have Sinopower we can't OC our RAM as well? This is what I did: OC Ram to 2933Mhz Change VCCIO to 1.1V and VCCSA to 1.15 in the BIOS |
Posted By: Animalm4st3r
Date Posted: 29 Jan 2018 at 5:44am
|
Cant Get my GSKILL VEngenve 3200 To work with XMP... aswell somethins of there |
Posted By: Yzerman19
Date Posted: 29 Jan 2018 at 6:00am
| " rel="nofollow - Can you get your ram to run at the rated 3200mhz if you set it manually? I can only get my 3000mhz corsair vengeance to run at 2700mhz stable with manual settings. Like I stated earlier, xmp won't boot :( |