Overclock Settings for AB350
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7416
Printed Date: 19 Jul 2025 at 5:03am Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Overclock Settings for AB350
Posted By: wussery
Subject: Overclock Settings for AB350
Date Posted: 24 Jan 2018 at 8:14am
" rel="nofollow - I have OC'd my motherboard to 3800mhz and 1.375 volts. I can run Cinebench and Aida64 without my system crashing. However, if I run Prime95 I cannot run it for longer than 1 minute without it rebooting my PC. Should I disregard Prime95 for this CPU and the settings that I have, or should I back off my OC settings until the PC can pass Prime95?
Equipment list in signature.
------------- MOBO: ASRock AB350 Gaming-ITX/ac CPU: Ryzen 5 1600 RAM: G.SKILL TridentZ Series 16GB DDR4 3200 GPU: EVGA GeForce GTX 1060 SC PSU: EVGA 750 B3 Cooler: Cryorig C7 Boot Disk: SAMSUNG 850 PRO 256GB SSD
|
Replies:
Posted By: kerberos_20
Date Posted: 24 Jan 2018 at 8:34am
prime is heavy on hardware, if it restarts, u may have power supply issues but if it does it only in prime (games etc all fine) u may ignore it until u get issues
|
Posted By: datonyb
Date Posted: 24 Jan 2018 at 10:15pm
" rel="nofollow - what cooler you using ? what if any case fans ? finally not all 1600 ryzens were created equal.......
the last one i tweaked was a real pain to get stable at 3.8 and runs closer to 1.4 volts now, certainly not one of the 'silicon lottery winners for sure'
have you tried 3.7 at same voltages for testing purposes ?
------------- [url=https://valid.x86.fr/jpg250] [/url]
3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold
|
Posted By: wussery
Date Posted: 25 Jan 2018 at 1:24am
" rel="nofollow -
datonyb wrote:
what cooler you using ? I'm using a Cryorig C7 CPU cooler.
what if any case fans ? I have four case fans in a Corsair Air 240 Case. The fans are Corsair AF 120 Quiet Edition fans.
finally not all 1600 ryzens were created equal.......
the last one i tweaked was a real pain to get stable at 3.8 and runs closer to 1.4 volts now, certainly not one of the 'silicon lottery winners for sure'
have you tried 3.7 at same voltages for testing purposes ? Yes I have tried 3.7 at 1.35 volts and this also fails in Prime95 although Prime 95 runs for a longer period of time.
|
------------- MOBO: ASRock AB350 Gaming-ITX/ac CPU: Ryzen 5 1600 RAM: G.SKILL TridentZ Series 16GB DDR4 3200 GPU: EVGA GeForce GTX 1060 SC PSU: EVGA 750 B3 Cooler: Cryorig C7 Boot Disk: SAMSUNG 850 PRO 256GB SSD
|
Posted By: nnyymm
Date Posted: 25 Jan 2018 at 1:45am
" rel="nofollow - Wow after reading your result, I actually felt lucky for my r5 1600. I manage to get 1.2375 vcore stable using prime95 for 1hour. I was using the wraith spire, peaks at 77 degrees during the test though.
Are you running your ram at 3200? you may want to tone them down to factory setting like 2400/2666 1.2v and see how far your cpu can overclock first. You want to rule out that it is not memory instability.
|
|