AMD Motherboards - X370 Killer SLI bios 4.50 failed to boot with 64GB

Print Page | Close Window

X370 Killer SLI bios 4.50 failed to boot with 64GB

Printed From: ASRock.com
Category: Media&User's Review
Forum Name: AMD Motherboards
Forum Description: ASRock AMD Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7499
Printed Date: 22 Dec 2024 at 9:32pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: X370 Killer SLI bios 4.50 failed to boot with 64GB

Posted By: ccy
Subject: X370 Killer SLI bios 4.50 failed to boot with 64GB
Date Posted: 30 Jan 2018 at 9:19am

" rel="nofollow - I have a X370 Killer SLI motherboard installed with 4 pcs of Apacer 16GB 2400 RAM. The previous BIOS version was 3.40. The CPU is AMD Ryzen 1700. The system works ok most of the time except a case: The system will hang after working for few weeks. I have no clue yet whether it is software or hardware issue.

I upgrade the BIOS to 3.50, the system can boot. I continue upgrade 4.50, the system can't boot. After some trial and error, I remove 2 pcs of RAM from the motherboard, the system can boot again. I plug the 2 pcs RAM back to motherboard, the system can't boot.

I downgrade the BIOS to 3.50 with 4 pcs RAM installed, the system can boot and works again.

Is this a problem with latest 4.50?

Replies:

Posted By: Icreatin
Date Posted: 30 Jan 2018 at 10:56pm

I just updated to 4.50 from 3.50 and now am stuck at the post screen and cannot get into uefi all I can do is restart the system.

Changing the ram doesn't matter I just can't get into uefi.

System

Cpu: A8-9600
Ram: 2x 8g corsair vengeance (a2+b2)
Gpu: Gtx 660
Psu: Cs650m
Hdd: random SATA drive
OS: Win 10 pro

Posted By: ccy
Date Posted: 14 Jan 2019 at 9:18am

I upgrade bios to version 5.10 dated 21 Dec 2018 on the same X370 Killer SLI motherboard. Again, the system fail to boot.

I have 4x 16GB DDR4 Apacer 2400 installed. I remove one of the RAM and the system can boot with 3x 16GB ram. I re-plug RAM and try boot with 4x 16GB, it won't boot.

I go into BIOS setting and change the RAM frequency from Auto (2400Mhz) to 2133MHz. The system can boot with 4x16GB again.

I am not sure if this the RAM issue or BIOS firmware issue. The same hardware configuration works with BIOS version 3.50 on 4x16GB 2400MHz but won't work with 5.10.