No XMP in latest BIOS
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7539
Printed Date: 19 Jul 2025 at 5:04am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: No XMP in latest BIOS
Posted By: Nayuu
Subject: No XMP in latest BIOS
Date Posted: 02 Feb 2018 at 2:10pm
|
" rel="nofollow - Today I update to latest BIOS P4.50 of AB350M Pro4, there is no possibility of overclocking the memory by timing. But previous 2.40, there is such a possibility. Is it normal or a bug? I use 1600 CPU. And I want to XMP my memory. Thanks. |
Replies:
Posted By: wardog
Date Posted: 02 Feb 2018 at 2:35pm
|
" rel="nofollow - I better ask here. You did flash to 4.30 BEFORE 4.50, right? |
Posted By: ASRock_TSD
Date Posted: 02 Feb 2018 at 2:43pm
|
Dear Nayuu, Greetings, this is ASRock TSD. We install the same Ryzen 1600 CPU to double check the latest BIOS P4.50 version. Please refer to our test result as below picture, the XMP profile and DRAM frequency is available in BIOS.   So please double check the BIOS has been updated to P4.50 successfully and make sure your memory module support XMP profile. Thanks! All the best, ASRock TSD |
Posted By: elserge82
Date Posted: 02 Feb 2018 at 3:02pm
|
No XMP on amd cbs oc. I usualy do it manualy from advanced. Unless their is something with my flashing. ------------- Ryzen 5 1600, ASRock X370 fatality gaming k4, 2x16 GB T-Force 3000mhz, MSI GTX 1060 ITX 6GB GDDR5, Kingston SSD 250GB, Windows 10 64-bit PRO |
Posted By: kerberos_20
Date Posted: 02 Feb 2018 at 9:35pm
|
xmp on cbs oc is not supported yet but here is a trick on how to use xmp on cbs: go into amd cbs and switch ddr overclock to enabled then go to OC tweaker page se OC mode to asrock set up your xmp settings hit f10 (to save bios and restart) go back to bios switch to CBS in OC mode and u have now xmp settings in your cbs settings |
Posted By: elserge82
Date Posted: 02 Feb 2018 at 9:44pm
|
Thank you for the tip:). In my case I preferred doing it manually since the 3000 speed is not available in ASROCK oc mode. ------------- Ryzen 5 1600, ASRock X370 fatality gaming k4, 2x16 GB T-Force 3000mhz, MSI GTX 1060 ITX 6GB GDDR5, Kingston SSD 250GB, Windows 10 64-bit PRO |