My motherboard is not booting up
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=758
Printed Date: 22 Dec 2024 at 6:54pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: My motherboard is not booting up
Posted By: curi1999
Subject: My motherboard is not booting up
Date Posted: 03 Sep 2015 at 9:21pm
| My motherboard was turn off during the bios update and now is not booting up.. my motherboard is http://www.asrock.com/mb/AMD/FM2A75%20Pro4-M/" rel="nofollow - |
Replies:
Posted By: Xaltar
Date Posted: 03 Sep 2015 at 10:53pm
|
If the system lost power and was unable to complete the BIOS update then unfortunately the BIOS is unrecoverable and by extension the board is unusable. Fortunately all is not lost, you can order a new BIOS chip from ASRock directly and replace the damaged one. The info you need can be found http://www.asrock.com/support/index.asp?cat=RMA" rel="nofollow - here . The BIOS chip is $5 US + shipping. With a new BIOS chip your board should be good as it was before the failed update  Good luck and welcome to the forums
 |
Posted By: parsec
Date Posted: 03 Sep 2015 at 11:39pm
|
What method were you using for the BIOS update? If you were using Instant Flash, some ASRock boards can recover from a loss of power during an Instant Flash BIOS update. Just put the USB flash drive with the Instant Flash BIOS update file (in a USB 2.0 port on the board's IO panel) and start the PC. If you are lucky the BIOS update will start again on its own and hopefully complete. ASRock in the past stated this would work on some of their boards, maybe you will be lucky. ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
Posted By: curi1999
Date Posted: 04 Sep 2015 at 10:23pm
| I used the regular way the the usb bios update.. but, Do you know if i try to do this in this motherboard. |
Posted By: curi1999
Date Posted: 04 Sep 2015 at 10:31pm
|
curi1999 wrote: