Z370 (not x370) Taichi Intel 0A error wont post
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7587
Printed Date: 03 Aug 2025 at 12:48pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Z370 (not x370) Taichi Intel 0A error wont post
Posted By: RicoDiver
Subject: Z370 (not x370) Taichi Intel 0A error wont post
Date Posted: 06 Feb 2018 at 10:23am
|
" rel="nofollow - Greetings.. I'm trying to get this Mobo started... and I continue to not be able to post and the 0A code keeps showing up on the mobo. I've swapped / moved / tried 1 and both memory sticks in each slot - all with the same result. (the memroy I'm using IS on the approved list) cpu is intel I7-8700k 8th gen Memory is Corsair Dominator Platinum series 2 x 8gb ddr4 3000 MHZ CMD 16gx4m2b3000c15. No other devices pluged in... using mother boards graphis for now to see if I can get this to post. Any recommendations?
------------- Rico |
Replies:
Posted By: wardog
Date Posted: 06 Feb 2018 at 11:27am
I gotta hand it to ya  How hard was it to get your 8700K running on an AM4 X370 mobo? |
Posted By: wardog
Date Posted: 06 Feb 2018 at 11:30am
Leave it to Cursair.  A million and one revisions of this kit. Please post a pic(s) showing the rev # on each stick of your kit. |
Posted By: wardog
Date Posted: 06 Feb 2018 at 11:31am
|
" rel="nofollow - This is why I ask to see pics of their rev #: http://asrock.com/support/faq.us.asp?id=334 |
Posted By: RicoDiver
Date Posted: 06 Feb 2018 at 11:44am
|
I'll try. For now both sticks are ver 5.30 ------------- Rico |
Posted By: RicoDiver
Date Posted: 06 Feb 2018 at 11:51am
 ------------- Rico |
Posted By: wardog
Date Posted: 06 Feb 2018 at 12:18pm
|
Me, myself, and I think(KNOW!!) the Mem QVL is outdated in that it was created many many BIOS revision ago. I'd suggest borrowing a friends DDR4 and trying with those instead. Otherwise, contact ASRock Tech Support by phone tomorrow at 1-909-590-8308 (Pacific Time Zone, as yours) during normal business hours. Ask to have them retry the CMD16GX4M2B3000C15 rev5.3 Kit they have on your MB. It may take a day or two for them to accomplish this overseas and get back, so be forewarned. Keep me updated please. |
Posted By: RicoDiver
Date Posted: 06 Feb 2018 at 10:14pm
|
Ooops Z370 Taichi.. not the X good catch! ------------- Rico |
Posted By: RicoDiver
Date Posted: 07 Feb 2018 at 9:20pm
Tried a separate (different) memory stick in each slot....still come up with the 0a error..  ------------- Rico |
Posted By: RicoDiver
Date Posted: 14 Feb 2018 at 5:11am
|
So...after paying $ to have the board tested w/ cpu - memory..etc from the recommended distributor.. it was determined to be DOA... unfortunate...I had high hopes. ------------- Rico |