Intel Motherboards - H97M Anniv Bios update fail

Print Page | Close Window

H97M Anniv Bios update fail

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7593
Printed Date: 03 Aug 2025 at 1:21am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: H97M Anniv Bios update fail

Posted By: stellar41
Subject: H97M Anniv Bios update fail
Date Posted: 07 Feb 2018 at 12:49am

" rel="nofollow - Hi all,
I used the A-Tuning software to auto update asrock files and I included the BIOS in that. After rebooting, the PC remained at the very start of the bios process, the screen just says-
"press F2 or Del for UEFI
"press F6 for instant flash
"press F11 for boot menu
"press tab to switch screen

It doesn't go any further and doesn't respond to any key. After an hour I rebooted and its still at the same position.

Any tips on how to get back to normal booting?

thanks

Replies:

Posted By: stellar41
Date Posted: 07 Feb 2018 at 1:29am

Well, I did some more investigation. I removed all the drives plus the graphics card, and it then booted into bios just fine. Then I replaced each device one and one and rebooted after each and it was ok. In the end I noticed that the Bios was still at the original version (in my case 2.0) so it didnt update at all.

Posted By: wardog
Date Posted: 07 Feb 2018 at 3:20am

" rel="nofollow - You have the latest BIOS flashed now then?