Intel Motherboards - Z370 Taichi desperately need more settings.

Print Page | Close Window

Z370 Taichi desperately need more settings.

Printed From: ASRock.com
Category: Media&User's Review
Forum Name: Intel Motherboards
Forum Description: ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7599
Printed Date: 24 Nov 2024 at 10:11am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Z370 Taichi desperately need more settings.

Posted By: Botvinnik
Subject: Z370 Taichi desperately need more settings.
Date Posted: 07 Feb 2018 at 6:52pm

As a previous Z170 OC Formula owner before. Since ASRock don't made Z370 OCF/MOCF so I went for Taichi. Seen someone on Finland hitting DDR4-4400 HCI memtest stable with this board.

Here are what should be implement to the BIOS. Maybe The design of Extreme 4 / K6 / Taichi / Pro i7 are the same. I think all models can benefit from this.

1.Boot failure guard count. Extremely necessary for high speed DDR4 !! On Z170 OCF I can set numbers to whatever I want. Sometimes it take 10 boot to be just 1 successful boot. But there is no options on Taichi here. MB just boot 3 times and if it can't boot then it will reset.

2.Slope settings on advanced memory tab. Raising slope and Falling slope can be crucial for high speed DDR4 also. On Z170 OCF I can gain another 200Mhz by manipulate these settings.

3.DRAM Boot voltage. On high speed DDR4 boot voltage may need higher than actual voltage.

4.VRM switching frequency. Also this can be useful for high Ghz.

Optionals.

1.Adaptive Voltage. I know that this is ASUS exclusive. But I think it is nice. ASRock should try to copy this. The problem with offset voltage is AVX programs will overshoot voltage too much.