AMD Motherboards - x370 Taichi Bios 4.40 system doesn't boot

Print Page | Close Window

x370 Taichi Bios 4.40 system doesn't boot

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7671
Printed Date: 04 Nov 2025 at 6:57pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: x370 Taichi Bios 4.40 system doesn't boot

Posted By: gkwi
Subject: x370 Taichi Bios 4.40 system doesn't boot
Date Posted: 15 Feb 2018 at 12:27am

" rel="nofollow - Today I updated to BIOS 3.30 first, did a reboot, downloaded Version 4.40, put it onto an USB Stick,
rebooted and installed the new BIOS.
Now the system goes into a loop trying to boot with no success.

Any tip, help?
Thanks in advance

Replies:

Posted By: Erasmus_Tycho
Date Posted: 15 Feb 2018 at 1:21am

" rel="nofollow - Have you cleared CMOS? If that doesn't work, try taking out ram, only leaving 1 stick in. When I updated to 4.4 I unplugged all of my inputs except audio, power, monitor, mouse, and keyboard... all of my other hardware (Oculus rift, multiple sensors, peripherals, controllers, printers) were taken off to help get the system initially booted and I had zero problems.

Also, did you clear CMOS before applying 4.4? (after applying 3.3, before 4.4)

Posted By: gkwi
Date Posted: 15 Feb 2018 at 1:47am

Thank you, removing 3 x 16GB mem did the job,
now the system booted I i will check what's going on

Posted By: Prodif
Date Posted: 15 Feb 2018 at 2:00am

gkwi

Put firmwares in a root of a system disk, USB is not necessary. Bios perfectly reads them.

-------------
ASRock x370 Taichi (bios v2.36) / Ryzen-1800X / Crucial CT16G4DFD824A x2 / GPU: AMD R9 NANO / SSD NVMe Samsung 960 PRO MZ-V6P1T0BW (M.2) / HDD SATA 3TB x6 / PSU: Corsair AX860i
ps. RedDragon, by AG

Posted By: gkwi
Date Posted: 15 Feb 2018 at 2:38am

thx, I will try to remember at the next update :-)