Booting new Z97E-ITX with i5-5765c
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=768
Printed Date: 22 Dec 2024 at 6:36pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Booting new Z97E-ITX with i5-5765c
Posted By: deltastorm
Subject: Booting new Z97E-ITX with i5-5765c
Date Posted: 04 Sep 2015 at 11:55pm
|
If I buy a new Z97E-ITX I'm guessing it will have a BIOS version without Broadwell support. Will the board still boot up with an i5-5765c in order to flash the new BIOS? Or does it have to be flashed beforehand? |
Replies:
Posted By: parsec
Date Posted: 07 Sep 2015 at 3:21pm
|
I wish I could tell you either way, but I don't know. Broadwell users have not posted much in this forum, since there are only five Broadwell processors available, and three of those are Xeons. The CPU Support list for the Z97E-ITX shows UEFI/BIOS version 1.70 needed to support Broadwell processors. Version 1.70 is no longer listed in the UEFI download list, which leaves version 1.80 as the necessary version for Broadwell: http://www.asrock.com/mb/Intel/Z97E-ITXac/?cat=CPU" rel="nofollow - http://www.asrock.com/mb/Intel/Z97E-ITXac/?cat=CPU Since the 1.80 UEFI version description includes a CPU microcode update, that indicates a Broadwell processor most likely would not POST without the appropriate UEFI version installed. http://www.asrock.com/mb/Intel/Z97E-ITXac/?cat=Download&os=BIOS" rel="nofollow - http://www.asrock.com/mb/Intel/Z97E-ITXac/?cat=Download&os=BIOS You cannot update the UEFI/BIOS if the CPU will not POST, or without a CPU in the board. You should submit a Technical Support Request form with your question, including the ASRock board model. You can find the form in the link below: ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|