ASRock X370 Killer SLI/ac Pulsing Red
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7719
Printed Date: 26 Dec 2024 at 8:17pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ASRock X370 Killer SLI/ac Pulsing Red
Posted By: andregin92
Subject: ASRock X370 Killer SLI/ac Pulsing Red
Date Posted: 18 Feb 2018 at 12:07pm
|
" rel="nofollow - Hello All, First post and first build using AMD/Ryzen and I'm having some trouble. I did some searching on here and found a few answers, none of which fixed my problem. Initially I had trouble getting the computer to turn on at all; the blue power LED would flash for half a second and then never again. On the MOBO a slow, pulsing red light would start afterward. Eventually I unplugged everything and plugged it back in exactly as I had it and the computer finally turned on, but I immediately received a BSOD with the error code "Inaccessible Boot Device". Now this is where I'm encountering 2 separate issues: 1) The HDD I'm using was actually from an older build and, according to various internet posts, the BSOD with that specific error is common with AMD builds. Apparently to fix this you just need to run your Windows setup again OR select the repair option, which so far is working for me. 2) Despite the PC turning on and everything appearing to work normally now, I'm still seeing the pulsing red light on the MOBO. When I go in the UEFI it recognizes the RAM, however the RAM is plugged in to A1 and B1, but I read it should be A2 and B2 when only using 2 sticks. My RAM also didn't appear on the list of compatible RAM that I could find. So the first issue is basically resolved, but why am I still received the pulsing light? Parts list is as follows: MOBO: ASRock X370 Killer SLI/ac GPU: MSI GeForce GTX 1060 6GB DDR5 CPU: AMD Ryzen 5 1600 RAM: GeIL Pristine 4GB 288-PIN DDR4 2133 (GP44GB2133C15SC) - This is the model number that didn't appear to be compatible HDD: 3.5" Seagate Barracuda 1TB UPDATE: When checking my system specs it shows I have 8GB of RAM installed, but the pulsing red light is still going. All drivers are up to date as well and it recognizes the GPU. I'm not sure what's causing the pulsing light but everything appears to be recognized and updated. |
Replies:
Posted By: kerberos_20
Date Posted: 18 Feb 2018 at 5:38pm
|
leds u can configure either in uefi or in windows with provided software from asrock red "breathing" is default setting as for ram..a1/b1 can be used, but does not overclock that much as a2/b2 slots ------------- http://valid.x86.fr/diq4l4" rel="nofollow">  http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |