Print Page | Close Window

Asrock Z370 Taichi -A-Tuning-Utility dangerous bug

Printed From: ASRock.com
Category: OverClocking(OC) Zone
Forum Name: OC Technical Discussion
Forum Description: OC enthusiast's tech talk
URL: http://forum.asrock.com/forum_posts.asp?TID=7782
Printed Date: 01 Feb 2023 at 8:19am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Asrock Z370 Taichi -A-Tuning-Utility dangerous bug
Posted By: bug1234
Subject: Asrock Z370 Taichi -A-Tuning-Utility dangerous bug
Date Posted: 22 Feb 2018 at 11:02pm
Helllo,

i used the A-Tuning-Utility (newest version 3.0.184) and set some voltages, than i klicked apply.

I have seen several times wrong values set, which i have never set.

For example:

VCCSA 1,56 V => I set it maximum to 1,15 V

or DMI 1,859 V => I never touched this parameter

If this tool reallly applied this values the cpu could be already damaged. It works, but you cant look inside the die what happened there.

I dont understand why Asrock is offering such a buggy and dangerous tool, i dont know if this values has been ever applied by the motherboard. I've deinstalled the tool and wont use it again.

But if it is the case, that this harmful values has been apllied,  they are playing with your pretty expensive cpus.

There are no warnings, if the tool is using damaging values, as you know from other vendors.

You need to scroll down every time check the whole chart, to verify that the tool hasn't set some wrong, dangerous  and damaging values by itself.

Best regards

bug1234





Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net