dual monitors fail
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7793
Printed Date: 05 May 2024 at 2:49pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: dual monitors fail
Posted By: Meiyou
Subject: dual monitors fail
Date Posted: 23 Feb 2018 at 12:00pm
|
" rel="nofollow - I installed the A320M-HDV with A8-9600 apu. However only one monitor is recognized by the system in WIN10 64bit. Either the DVI-D or the D-Sub work individually however not together and the system won't detect the second monitor. How can I enable the dual monitor set up? Thanks! |
Replies:
Posted By: ASRock_TSD
Date Posted: 23 Feb 2018 at 12:22pm
|
Dear Meiyou, Greetings, this is ASRock TSD. According to your question, we install the same A8-9600 CPU to verify the Dual monitor display. Please refer to our test result; we can configure a dual monitor system with A320M-HDV successfully. There is no further option should be adjusted under BIOS setup, just make sure the VGA driver has been installed properly.  If the symptom stills the same, we provide some suggestions for verifying: 1. Please enter to the BIOS setup and then load BIOS default via [F9] Key. 2. Uninstall the VGA driver and reinstall it as below to verify. http://asrock.pc.cdn.bitgravity.com/Drivers/AMD/VGA/AMD_VGA%28v16.50.2601_VGA%29.zip" rel="nofollow - http://asrock.pc.cdn.bitgravity.com/Drivers/AMD/VGA/AMD_VGA(v16.50.2601_VGA).zip 3. Connect one monitor by turns to check if both monitors are functional. 4. If possible, please install other monitors to verify. Thanks! All the best, ASRock TSD |
Posted By: msilva
Date Posted: 23 Oct 2020 at 10:43pm
| Does this apply to A320M-HD as well? |
Posted By: muyyez
Date Posted: 24 Jun 2021 at 2:53pm
| Can i get the website link for vga driver download. The link you share is not acessable. Thank you |