How can i OC my 2400G VGA from AB350M-HDV BIOS?
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7805
Printed Date: 15 Jul 2025 at 4:41pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: How can i OC my 2400G VGA from AB350M-HDV BIOS?
Posted By: JinxB1rd
Subject: How can i OC my 2400G VGA from AB350M-HDV BIOS?
Date Posted: 24 Feb 2018 at 1:19pm
|
Sorry for my english: I think I finally found an option (or not?) in the bios, so i dont have to use Ryzen Master (i dont like it). Could somebody explain, how this fields working?   + Bonus:I see this on the main screen. Its seems not okay (Single-channel mode?)  |
Replies:
Posted By: LSVlad
Date Posted: 24 Feb 2018 at 7:07pm
|
" rel="nofollow -
Privet! V tehpodderjky pisal; chto otvetili?
|
Posted By: JohnM
Date Posted: 24 Feb 2018 at 7:35pm
|
Sorry for not directly answering your question as I don't know how VID values work, but I notice your RAM is operating in single channel mode. Getting it into dual channel mode will benefit the graphics more than overclocking the GPU. ------------- ASRock Fatal1ty AB350 ITX P4.90, AMD Ryzen 5 2400G, 2x8GB Corsair CMK16GX4M2A2666C16, 250GB Samsung 960EVO, 500GB Samsung 850EVO, 4TB WD Blue, Windows 10 Pro 64, Corsair SF450, Cooler Master Elite 110 |
Posted By: JinxB1rd
Date Posted: 24 Feb 2018 at 8:38pm
I know, thats why i posted this picture. Btw in windows the cpu-z show dual channel mode. 
|
Posted By: JohnM
Date Posted: 24 Feb 2018 at 9:59pm
|
I'm sorry. I saw your screen shots but missed the text in between them. See http://forum.asrock.com/forum_posts.asp%3FTID=5053&PN=1&title=bios-no-detecting-dualchannel-memory" rel="nofollow - here . You might have a bad stick of RAM. ------------- ASRock Fatal1ty AB350 ITX P4.90, AMD Ryzen 5 2400G, 2x8GB Corsair CMK16GX4M2A2666C16, 250GB Samsung 960EVO, 500GB Samsung 850EVO, 4TB WD Blue, Windows 10 Pro 64, Corsair SF450, Cooler Master Elite 110 |
Posted By: JinxB1rd
Date Posted: 24 Feb 2018 at 11:49pm
You are right, one ram of the kit fail on aida test. |
Posted By: Manu
Date Posted: 25 Feb 2018 at 9:59am
| " rel="nofollow - Hi, did you find option to set DRAM Size for the GPU? |
Posted By: JinxB1rd
Date Posted: 27 Feb 2018 at 8:56pm
|
" rel="nofollow - http://forum.asrock.com/forum_posts.asp?TID=7770
Title anybody? Impossible do that from BIOS? ------------- Asrock AB350M-HDV, AMD Ryzen 5 2400G, CORSAIR Vengeance LPX 2x4GB DDR4 3000MHz(CMK8GX4M2B3000C15R), OCZ 60GB Agility 3, Western Digital WD5000AAKX 500GB, FSP Hexa+ 500W, Sharkoon Vaya + Arctic F12 Pro |
Posted By: JinxB1rd
Date Posted: 08 Mar 2018 at 12:04pm
|
" rel="nofollow - Still i don't know, how can i set OC for the VGA. Ryzen Master throw blue death every time, when i try to do something. Is there any program, what can help to set the new clock? Or as i posted, can i edit somehow in bios? What XFR2.0 do? ------------- Asrock AB350M-HDV, AMD Ryzen 5 2400G, CORSAIR Vengeance LPX 2x4GB DDR4 3000MHz(CMK8GX4M2B3000C15R), OCZ 60GB Agility 3, Western Digital WD5000AAKX 500GB, FSP Hexa+ 500W, Sharkoon Vaya + Arctic F12 Pro |
Posted By: JinxB1rd
Date Posted: 12 Mar 2018 at 9:29pm
|
" rel="nofollow - Ok, so i got answer from asrock, they sent this: c. Overclock Kindly make few overclock adjustments below Step 1. Advanced\AMD CBS\NBIO Common Options\XFR 2.0 Configuration\Advanced\Accepted\GFX Clock Frequency\1240 Step 2. Advanced\AMD CBS\NBIO Common Options\XFR 2.0 Configuration\Advanced\Accepted\GFX Core voltage\35 Step 3. OC Tweaker\OC Mode Change Switch\AMD CBS Setting Step 4. Press F10 to save and exit What do you think? 35 core voltage seems interesting. ------------- Asrock AB350M-HDV, AMD Ryzen 5 2400G, CORSAIR Vengeance LPX 2x4GB DDR4 3000MHz(CMK8GX4M2B3000C15R), OCZ 60GB Agility 3, Western Digital WD5000AAKX 500GB, FSP Hexa+ 500W, Sharkoon Vaya + Arctic F12 Pro |
Posted By: Mobawe
Date Posted: 16 Mar 2018 at 6:47pm
|
Hi all I have had a lot of problems trying to just make my new build run at standard clock speeds. I have tried to follow all the good advice with Windows installation from USB, drivers from AMD site etc. Just a little confused however about the AMD drivers. I only install the following driver for the ryzen 5 2400G Radeon Software for Ryzen Desktop Processors with Radeon Vega Graphics Version 17.40.3701 (Windows Driver Store Version23.20.827.0).) https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-for-Ryzen-Desktop-Processors-with-Radeon-Vega-Graphics-Release-Notes.aspx It seems however that some people also talk about a chipset that I should install prior to this? What is that? I think Windows install some AMD chipset automatically during install- Is it that or what? I have set the RAM frequency using the XMP profile in the UEFI. I could make it boot and post with the max OC value for the board- 3466 MHZ. but then it was impossible to increase the vega 11 mhz upwards from the 400 mhz that the Ryzen master set without getting a crash. I have found that it seem very difficult to increase the MHZ for both the CPU and the integrated GPU in Ryzen Master even when I lower my RAM frequency. It makes me very worried about my ram and compatibility. I deliberately bought them with extra capacity and suppopsedly as samsung B-die etc. I realize that it is not Flare-X recommended AMD but I read people say it should not matter as long as it was high quality Bdie etc. My problems could also be related to my poor skills in this area - But still trying and not giving up :-). Now I wanna try and ditch the OC with Ryzen master and try and do it in the Uefi/Bios. I found a good explanation how to do it in the ASROCK Uefi that I believe can also be applied for my ITX board. It gives agood explanation to that value of "30" mentioned in the above step guide from Asrock. 30 = 1,25 VDDR SOC according to the explanation ( I am not an expert and just try to grap the knowledge from around the web and put it together - It is not easy with this board :-( ) https://www.reddit.com/r/Amd/comments/842ehb/asrock_ab350_pro4_guide_bios_overclocking_raven/ I really miss a step by step guide how to set the RAM, CPU and integrated GPU for the ASROCK boards - and how to OC. Now it is even diffucult to set the parameters for making the APU run at stock values. Please give me your thoughts and advice - Or maybe I should make a new post  ------------- Ryzen 5 2400g/ ASRock Fatal1ty AB350 Gaming-ITX/ NH-L9A-AM4 L.PROFILE/ INWIN-CHOPIN 150W/ G.Skill Ripjaws V-DDR4,2x8-3600MHz(F4-3600C16D-16GVK)/ Samsung 850 EVO MZ-75E500-SSD-500GB/ UEFI-bios 4.51A |
Posted By: cristy6100
Date Posted: 16 Mar 2018 at 6:59pm
|
You dont need any drivers besides the ones that come with Windows and the AMD Graphics driver for the IGPU if you use it, download and install the AMD graphics driver, it provides 2-3 drivers more, for the PSP chip, HD audio, and SMBus), besides this driver you dont need any chipset/sata/audio/wlan/lan drivers, Windows 10 provides all necesary drivers for these components, and dedicated drivers for these are known to cause more troubles than fixes
Regarding overclocking the IGPU, overcloking is in a bad state now with Raven Ridge, many people me including experience GPU throttle even on default settings and good cooling, plus you have those stupid menus and naming for voltages, you should wait until a new bios will be available with improved menu naming system, you should not go past 1.2 SOC in Raven Ridge, and you dont have a accurate voltage info for the SOC, and many boards read the SOC voltage wrong by +0.05-0.10V I would not trust those numbers, ASRock should provide a GPU voltage option in the normal overclocking menu, not a copy-paste from the default AMD firmware buried in the AMD CBS
|
Posted By: Mobawe
Date Posted: 16 Mar 2018 at 9:06pm
|
" rel="nofollow - Thanks for the clarification about drivers. In a way I am glad to hear that it is a well known issue with the IGPU setting- Gives me hope that it will be better in the future :-). Does anybody have any knowledge about if a new Bios version from Asrock or drivers from AMD is on the way? Seems that many people have problems setting the standard values for this chip. I also feel that Ryzen Master is not stable but maybe that is just me or related to my rams. I think however I will try to set some conservative values in the Uefi, to try and reach the standard clock speeds for the IGPU without using the Ryzen Master. ------------- Ryzen 5 2400g/ ASRock Fatal1ty AB350 Gaming-ITX/ NH-L9A-AM4 L.PROFILE/ INWIN-CHOPIN 150W/ G.Skill Ripjaws V-DDR4,2x8-3600MHz(F4-3600C16D-16GVK)/ Samsung 850 EVO MZ-75E500-SSD-500GB/ UEFI-bios 4.51A |
Posted By: JinxB1rd
Date Posted: 16 Mar 2018 at 10:22pm
|
I tried what asrock sent to me, but my system get bluescreen always. The joke is that with this values your igpu never change back to the low frequency (400-500), it keeps the clock on 1240. So thats not a real tuning, still keep chrashing. However, i dont know, what voltage vid change or do, i dont want to kill my hardwers and try raising this value, so yeah... I hope they want to make able the bios to change values from OC menu safely. ------------- Asrock AB350M-HDV, AMD Ryzen 5 2400G, CORSAIR Vengeance LPX 2x4GB DDR4 3000MHz(CMK8GX4M2B3000C15R), OCZ 60GB Agility 3, Western Digital WD5000AAKX 500GB, FSP Hexa+ 500W, Sharkoon Vaya + Arctic F12 Pro |
Posted By: voltron00x
Date Posted: 17 Mar 2018 at 7:54pm
| Same issues here with the X370 Fatality ITX. Literally all the exact issues you noted. I gave up and am running at stock GPU clocks with RAM at 2933 and going to wait for a bios revision. |