ROMED8-2T - No BMC
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=79749
Printed Date: 11 May 2025 at 12:39am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ROMED8-2T - No BMC
Posted By: mrbsquish
Subject: ROMED8-2T - No BMC
Date Posted: 13 Nov 2024 at 1:31pm
Hey all,
I've been collecting everything to build my first home server. Here is the parts list so far :
ROMED8-2T
AMD EPYC 7773x
Samsung M393A8G40AB2-CWE 64GB 2Rx4 PC4-25600 ECC Registered Server Memory RAM X 4
Noctua - NH-U14S TR4-SP3
EVGA Super Nova 1600 T2 PSW
I purchased the ROMED8-2T and EPYC7773x on ebay, and they arrived some time back with the CPU already in place, but I was waiting on other parts (cooler, power switch, ram etc). Yesterday, I hooked everything up, I get the PWR Standby LED on, but no BMC at all. Tried a different PSU, same result. I've since removed the Cooler, CPU and RAM, and still no BMC.
I've been advised on another forum that the ROMED8-2T is more than likely faulty. But would like that confirmed.
Various photos can be found here :
https://drive.google.com/file/d/11Qft88TlwpxITYw5EjDdP802fD3E6SWF/view?usp=sharing" rel="nofollow - https://drive.google.com/file/d/11Qft88TlwpxITYw5EjDdP802fD3E6SWF/view?usp=sharing
Would appreciate any advice, or potential things to try.
Cheers
|
Replies:
Posted By: mrbsquish
Date Posted: 13 Nov 2024 at 2:38pm
Posted By: perby
Date Posted: 27 Nov 2024 at 12:26pm
Bought mine through Amazon and found your post with google-dorks for similar issue (BMC page says "Updating Firmware" endlessly).
I have a message into support; no response yet though.
On a side note, I have googled around a lot and I am starting to wonder if there was a bad batch of these mobos. I'm pretty perturbed considering I dropped north of 6k on kit for this server.
|
|