Intel Motherboards - ASROCK MB J3455-ITX can´t boot W10 after update

Print Page | Close Window

ASROCK MB J3455-ITX can´t boot W10 after update

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7984
Printed Date: 03 Aug 2025 at 2:46pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: ASROCK MB J3455-ITX can´t boot W10 after update

Posted By: astral7
Subject: ASROCK MB J3455-ITX can´t boot W10 after update
Date Posted: 08 Mar 2018 at 9:45pm

ASROCK MB J3455-ITX can´t boot W10 after latest update.

Steps to this problem:

1. clean instalation Windows 10 Pro 64 bit (original DVD) - ok

2. Update to Windows 10 Pro 1709 build 16299.125 from the internet - ok

3. automatic update: KB4056887 + KB4058043 + KB4041994 + Intel Corporration driver update for Intel HD Graphics + KB890830 + KB2267602

And after that I can´t boot system.

I have tried turn off power save functions in bios (to C0, sport) , with same result.

I have two computers with same result. I have tried it 4 times, with same result.

Replies:

Posted By: nosirrahx
Date Posted: 09 Mar 2018 at 2:37pm

" rel="nofollow - If you are installing from scratch it might be a good idea to integrate the updates into your image and try installing again.

windows10.0-kb4090914-x64_c72e85e0ed037eee289e3793c01b5f0a0f7b63f1.msu
windows10.0-kb4090913-x64_3bc0210aa8b3e6ff99c876c8df45d3d6900c6f32.msu

These are the 2 critical ones, "servicing stack update" and "cumulative update".

If you use the media creation tool the install.ESD file will have home and pro and a bunch of other builds. Use the following command to extract just home and pro while converting to install.WIM:

dism /Export-Image /SourceImageFile:c:\esd\install.esd /SourceIndex:3 /DestinationImageFile:c:\esd\install.wim /compress:max /checkintegrity

dism /Export-Image /SourceImageFile:c:\esd\install.esd /SourceIndex:8 /DestinationImageFile:c:\esd\install.wim /compress:max /checkintegrity

From there you can use GUI DISM to integrate the 2 updates mentioned above.

https://archive.codeplex.com/?p=dismgui

The following command will convert install.WIM back into install.ESD (not totally necessary but it makes the main install component way smaller):

Dism /Export-Image /SourceImageFile:c:\esd\install.wim /SourceIndex:1 /DestinationImageFile:c:\esd\install.esd /Compress:recovery /CheckIntegrity

Dism /Export-Image /SourceImageFile:c:\esd\install.wim /SourceIndex:2 /DestinationImageFile:c:\esd\install.esd /Compress:recovery /CheckIntegrity

C:\ESD <- where to drop install.ESD. It lines up with the commands above.

Posted By: astral7
Date Posted: 09 Mar 2018 at 3:56pm

" rel="nofollow - I am not professional. I do not know what is install.EDS, install.WIM
where to integrate? To system, or to installation DVD ? I need more help.

And I don´t think that this is solution.
Automatic update from the internet finished successuly. No error.

Problem has happened when I restarted computer. (same result for each of my 10 mainboards from ASROCK)

If I won´t get easy solution, I will claim my 10 ASROCK mainboards.

perhaps, ASROCK can not sell motherboards for windows 10 that can not be updated in the usual way

Posted By: astral7
Date Posted: 09 Mar 2018 at 5:05pm

" rel="nofollow - I tried to install latest version of bios 1.40
http://asrock.com/mb/Intel/J3455-ITX/?cat=Download&os=BIOS

And now it works.

I should have tried it before. Sorry.

I will do it for all of my mainboards.