AsRock x870E Nova WiFi 00 code but working
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=80128
Printed Date: 19 Jul 2025 at 8:01am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: AsRock x870E Nova WiFi 00 code but working
Posted By: aquas92
Subject: AsRock x870E Nova WiFi 00 code but working
Date Posted: 15 Nov 2024 at 6:22am
|
Hello. I am new here. I bought an AsRock x870E Nova WiFi, which has been running Ryzen 7 9800X3D for a week now. Installed RAM is G.SKILL 32GB (2x16GB) 6000MHz CL30 Flare X5 AMD EXPO, SSD KC 3000 4 TB, PSU Seasonic GX-1000. From the first time I turn on the computer, there is a 00 error on the motherboard, but the system boots normally and there are no symptoms, it functions properly both during benchmarks, games and other heavy tasks. Should I be concerned? |
Replies:
Posted By: NDRE28
Date Posted: 15 Nov 2024 at 7:20am
|
Hello! As long as you encounter no issues, you shouldn't worry! When turning on the PC, it's normal for the q-code display to show you a bunch of diverse codes. |
Posted By: aquas92
Date Posted: 15 Nov 2024 at 7:24am
| I would like to be understood correctly. Even now, about two hours after turning on the Windows system q-code display shows code 00. |
Posted By: aquas92
Date Posted: 16 Nov 2024 at 3:45am
| Refresh |
Posted By: Xaltar
Date Posted: 16 Nov 2024 at 7:40am
|
A 00 code literally means no compatible CPU found and if it never changes then the system should not be functional. That means it's a glitch in the Dr. Debug firmware. Likely just some corrupt save information. Does the 00 code change at any time during the POST process? If not, the firmware that controls the code could just be frozen/stuck. You can try disconnecting the system from power, pressing and holding the power button for 3 seconds or so then remove the CMOS battery. Leave the system like this for 10 mins or so then replace the battery, reconnect power and attempt to power the system on again. Good luck. ------------- 
|