Z170 Extreme7+ Memory Issues
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=802
Printed Date: 21 Dec 2024 at 10:53pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Z170 Extreme7+ Memory Issues
Posted By: PeteH
Subject: Z170 Extreme7+ Memory Issues
Date Posted: 10 Sep 2015 at 1:36am
|
Hi all, Can only install Windows 10 on my new build with the 2x 8GB memory in slots DDR4_A1 and DDR4_B1. If I put them in DDR4_A2 and DDR4_B2 (the preferred slots according to the manual) Windows 10 goes into the "repair loop". Going to re-seat my processor tomorrow just in case. Anyone else had issues? Pete
|
Replies:
Posted By: parsec
Date Posted: 10 Sep 2015 at 2:03am
|
Did you clear the CMOS/BIOS after moving your memory to the other slots? Any time you change the slot location of the DIMMs you use, you must clear the CMOS/BIOS. Otherwise you will have problems like you have seen. ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
Posted By: PeteH
Date Posted: 10 Sep 2015 at 3:11am
| Wasn't aware of that. I'll try it in the morning and report back. Thanks for you help. Pete |
Posted By: PeteH
Date Posted: 10 Sep 2015 at 2:49pm
| Reset CMOS this morning and everything now works as it should. Thanks for your help. Pete |
Posted By: parsec
Date Posted: 11 Sep 2015 at 12:48am
|
Great, thanks for reporting back. After any hardware change, changing slots of a video card or memory, simply changing the SATA port connections of your drives or adding a new drive, clearing the CMOS/BIOS should be done. You may see Windows requesting a reboot after adding or changing drives, that won't happen after a CMOS/BIOS clear. ------------- http://valid.x86.fr/48rujh" rel="nofollow">
|