x370 Taichi issue after bios update (4.60)
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8036
Printed Date: 18 Jul 2025 at 9:49am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: x370 Taichi issue after bios update (4.60)
Posted By: DarthVadeRus
Subject: x370 Taichi issue after bios update (4.60)
Date Posted: 12 Mar 2018 at 8:37pm
|
Guys i update my bios to version 4.60. And after that somethimes i have black screen (no video), but i hear sound. After reset, my PC dont boot and on dr. Debug display glows b2 code. If i shut down my PC after that it dont boot. Just glows all my RGB lighting but no one cooler dont work, and i dont have no one symbol on dr. Debug screen. sry for my bad english
|
Replies:
Posted By: DarthVadeRus
Date Posted: 12 Mar 2018 at 8:44pm
|
CPU AMD ryzen 1700x (3.7 OC 1.281 VCORE) GPU Sapphire RX580 NITRO+ LE MB Asrock TAICHI X370 RAM PATRIOT DDR4 Viper Elite 3000 PSU CORSAIR RM650i COOLER SCYTHE Mugen5 PCGH
|
Posted By: MisterJ
Date Posted: 12 Mar 2018 at 10:42pm
|
DarthVadeRus, I would suggest you flash to Beta BIOS/UEFI 4.61. Please do a F9, F10, flash (Instant Flash) to 4.61, F9 and F10 and let us hear. Enjoy, John.
------------- Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD |
Posted By: DunGoneNuts
Date Posted: 13 Mar 2018 at 12:55am
|
I personally tried the P4.60 and L4.61 and I would not use either. I would stick with either P3.30 or P4.40. I re-flashed back to P3.30 and did not like it due to stability issues when trying to post at 3200 so I went back to P4.40 and right now have my memory posted at 3333 (even though it is 3600) and running prime for over an hour with no issues yet at stock voltage. I also have 4 sticks which many people have claimed would never post past 3200 because of Ryzen peculiarities. I am wholly new to this so take everything I say with a "newbie" twist to it. Now I am using G Skill with Samsung B Die single file single rank so you memory is much different and you may very well have better luck with a later BIOS, but my experience is to not flash beyond P4.40 yet. ------------- Ryzen 9 5900X ASRock X370 Taichi G Skill F4-3200 MSI Armor 2070 MSI SPATIUM 1TB M2 WD 1TB M2 Crucial 500 SSD Corsair AX860i PSU Corsair H115Pro WB Phanteks Enthoo Pro SE |
Posted By: howardstern
Date Posted: 13 Mar 2018 at 9:26am
|
" rel="nofollow - I also have G Skill with Samsung B Die single file single rank so I would say are memory is almost identical. I run mine using the xmp setting pc3200 I have since the very first bios. What issues did you see with the 4.60 bios?
------------- Taichi Ryzen 1800X @ 4G EVGA GTX 1080 Corsair H100i AIO and full tower 780T GSkill FlareX 3200 SB ZX Windows 10 |
Posted By: howardstern
Date Posted: 13 Mar 2018 at 9:28am
" rel="nofollow -
Did you update to the 3.30 first? ------------- Taichi Ryzen 1800X @ 4G EVGA GTX 1080 Corsair H100i AIO and full tower 780T GSkill FlareX 3200 SB ZX Windows 10 |
DarthVadeRus wrote:Posted By: DarthVadeRus
Date Posted: 13 Mar 2018 at 11:55am
| Yes, firstly I have 1.5 bios, after I flash to 3.20 (then after 4 months) I was flashed bios 3.30, then 4.40. THEN after 2 weeks I flash 4.60. AND after 2 days I was seen my first black screen. Yesterday I was reinstall my Windows and all drivers, but anyway got black screen in PUBG (after 20 minuts) |
Posted By: wardog
Date Posted: 13 Mar 2018 at 12:59pm
|
" rel="nofollow - Your HW list above? b2 I have a hunch you have more than that list connected. |
Posted By: DarthVadeRus
Date Posted: 13 Mar 2018 at 1:32pm
| I'll post a sheet of equipment, after work. DxDiag. |
Posted By: DunGoneNuts
Date Posted: 13 Mar 2018 at 11:11pm
Could not get my 4 sticks to be stable at 3200 even though they were stable at 3333 with P4.40 ------------- Ryzen 9 5900X ASRock X370 Taichi G Skill F4-3200 MSI Armor 2070 MSI SPATIUM 1TB M2 WD 1TB M2 Crucial 500 SSD Corsair AX860i PSU Corsair H115Pro WB Phanteks Enthoo Pro SE |
Posted By: DarthVadeRus
Date Posted: 14 Mar 2018 at 12:46am
|
------------------ System Information ------------------ Time of this report: 3/13/2018, 19:44:24 Machine name: DESKTOP-GCPPOTS Machine Id: {499047AC-E3CF-42FB-A571-A67893BD524F} Operating System: Windows 10 Pro 64-bit (10.0, Build 17115) (17115.rs4_release.180302-1642) Language: Russian (Regional Setting: Russian) System Manufacturer: To Be Filled By O.E.M. System Model: To Be Filled By O.E.M. BIOS: BIOS Date: 03/02/18 19:23:58 Ver: 05.0000D (type: BIOS) Processor: AMD Ryzen 7 1700X Eight-Core Processor (16 CPUs), ~3.4GHz Memory: 16384MB RAM Available OS Memory: 16316MB RAM Page File: 5359MB used, 13900MB available Windows Dir: C:\Windows DirectX Version: DirectX 12 DX Setup Parameters: Not found User DPI Setting: 96 DPI (100 percent) System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled Miracast: Available, with HDCP Microsoft Graphics Hybrid: Not Supported DxDiag Version: 10.00.17115.0001 64bit Unicode ------------ DxDiag Notes ------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) --------------- Display Devices --------------- Card name: Radeon RX 580 Series Manufacturer: Advanced Micro Devices, Inc. Chip type: AMD Radeon Graphics Processor (0x67DF) DAC type: Internal DAC(400MHz) Device Type: Full Device (POST) Device Key: Enum\PCI\VEN_1002&DEV_67DF&SUBSYS_E3661DA2&REV_E7 Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER] Device Problem Code: No Problem Driver Problem Code: Unknown Display Memory: 16295 MB Dedicated Memory: 8137 MB Shared Memory: 8158 MB Current Mode: 1920 x 1080 (32 bit) (59Hz) HDR Support: Not Supported Display Topology: Internal Display Color Space: DXGI_COLOR_SPACE_RGB_FULL_G22_NONE_P709 Color Primaries: Red(0.688000,0.306164), Green(0.280773,0.656750), Blue(0.148937,0.063000), White Point(0.313977,0.329602) Display Luminance: Min Luminance = 0.500000, Max Luminance = 270.000000, MaxFullFrameLuminance = 270.000000 Monitor Name: Generic PnP Monitor Monitor Model: C24FG7x Monitor Id: SAM0E44 Native Mode: 1920 x 1080(p) (60.000Hz) Output Type: HDMI Monitor Capabilities: HDR Not Supported Display Pixel Format: DISPLAYCONFIG_PIXELFORMAT_32BPP Advanced Color: Not Supported Driver Name: C:\Windows\System32\DriverStore\FileRepository\c0323831.inf_amd64_1212be4b9fe2386c\aticfx64.dll,C:\Windows\System32\DriverStore\FileRepository\c0323831.inf_amd64_1212be4b9fe2386c\aticfx64.dll,C:\Windows\System32\DriverStore\FileRepository\c0323831.inf_amd64_1212be4b9fe2386c\aticfx64.dll,C:\Windows\System32\DriverStore\FileRepository\c0323831.inf_amd64_1212be4b9fe2386c\amdxc64.dll Driver File Version: 23.20.15017.3010 (English) Driver Version: 23.20.15017.3010 DDI Version: 12 Feature Levels: 12_0,11_1,11_0,10_1,10_0,9_3,9_2,9_1 Driver Model: WDDM 2.3 Graphics Preemption: Primitive Compute Preemption: DMA Miracast: Not Supported by Graphics driver Hybrid Graphics GPU: Not Supported Power P-states: Not Supported Virtualization: Not Supported Block List: No Blocks Catalog Attributes: Universal:False Declarative:False Driver Attributes: Final Retail Driver Date/Size: 31.01.2018 3:00:00, 1987280 bytes WHQL Logo'd: Yes WHQL Date Stamp: Unknown Device Identifier: {D7B71EE2-249F-11CF-D075-CFF95CC2DA35} Vendor ID: 0x1002 Device ID: 0x67DF SubSys ID: 0xE3661DA2 Revision ID: 0x00E7 Driver Strong Name: oem22.inf:cb0ae414b11e888f:ati2mtag_Polaris10DS:23.20.15017.3010:pci\ven_1002&dev_67df&rev_e7 Rank Of Driver: 00D12000 Video Accel: Unknown DXVA2 Modes: DXVA2_ModeMPEG2_VLD DXVA2_ModeMPEG2_IDCT DXVA2_ModeH264_VLD_NoFGT DXVA2_ModeHEVC_VLD_Main DXVA2_ModeH264_VLD_Stereo_Progressive_NoFGT DXVA2_ModeH264_VLD_Stereo_NoFGT DXVA2_ModeVC1_VLD DXVA2_ModeMPEG4pt2_VLD_AdvSimple_NoGMC DXVA2_ModeHEVC_VLD_Main10 Deinterlace Caps: n/a D3D9 Overlay: Not Supported DXVA-HD: Not Supported DDraw Status: Enabled D3D Status: Enabled AGP Status: Enabled MPO MaxPlanes: 1 MPO Caps: Not Supported MPO Stretch: Not Supported MPO Media Hints: Not Supported MPO Formats: Not Supported PanelFitter Caps: Not Supported PanelFitter Stretch: Not Supported ------------- Sound Devices ------------- Description: Speakers (2- High Definition Audio Device) Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_1220&SUBSYS_18491220&REV_1000 Manufacturer ID: 1 Product ID: 65535 Type: WDM Driver Name: HdAudio.sys Driver Version: 10.00.17115.0001 (English) Driver Attributes: Final Retail WHQL Logo'd: Yes Date and Size: 03.03.2018 0:00:00, 436736 bytes Other Files: Driver Provider: Microsoft HW Accel Level: Basic Cap Flags: 0xF1F Min/Max Sample Rate: 100, 200000 Static/Strm HW Mix Bufs: 1, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I
|
Posted By: wardog
Date Posted: 14 Mar 2018 at 2:55pm
|
" rel="nofollow - DXDiag? Really? List the components of the build and all attached. |
Posted By: DarthVadeRus
Date Posted: 14 Mar 2018 at 3:53pm
|
CPU AMD Ryzen 1700X (3.7Ghz 1.281vcore) GPU SAPPHIRE RX580 Nitro+ Special Edition HDD Seagate Barracuda 1Tb 7200 RAM 2xPatriot Viper Elite DDR4 8Gb (A2+B2) (XMP 2993 1.35v) MOBO Asrock x370 Taichi FAN Scythe Mugen 5 PCGH PSU Corsair RM650i
|
Posted By: wardog
Date Posted: 14 Mar 2018 at 4:15pm
C'mon   That error tells me you have a/some Legacy Devices. Older CD/ROM? Card Reader maybe? Old USB device plugged in? |
Posted By: Brandon
Date Posted: 16 Mar 2018 at 2:58pm
|
Posted By: DarthVadeRus
Date Posted: 17 Mar 2018 at 1:17am
|
wardog The problem is solved. The problem lay in the fact that my video card sagged in the slot under its own weight. After installing the special holder, as well as checking all power cables (4pin, 24pin, 6 + 8), the problem was eliminated. Thanks for the support.
|
Posted By: wardog
Date Posted: 17 Mar 2018 at 5:08am
bwhahahaha Yea. We'd have gotten to that, eventually. Like NEXT YEAR! So that's why the include it, huh?  |