Intel Motherboards - "No signal" message on monitor.

Print Page | Close Window

"No signal" message on monitor.

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8048
Printed Date: 22 Nov 2024 at 12:00am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: "No signal" message on monitor.

Posted By: skaa
Subject: "No signal" message on monitor.
Date Posted: 14 Mar 2018 at 1:17am

" rel="nofollow -

Hello.

I assembled the PC with this configuration:

- CPU Intel Xeon E3-1230 V5 3.4 GHz LGA 1151 80W BX80662E31230V5 Server Processor

- Motherboard ASRock C236 WSI Mini ITX Server Motherboard LGA 1151 Intel C236

- Memory Team Elite Plus 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 2133 (PC4 17000) Desktop Memory Model TPD416G2133HC15DC01

- Power 500 W

When I turn it on, the CPU fan is spinning, the Caps Lock, Num Lock, etc. are working on my keyboard but I see on my monitor this message "No signal" that is disappearing in about 1 minute. I use on-board VGA and HDMI.

I check both VGA and HDMI modes - the same. Monitor is working with the same cable with another PC.

Could you please advise what to do?

Thank you.

====================

I found in the motherboard manual this sentence:

Intel® HD Graphics Built-in Visuals and the VGA outputs can be supported only with processors which are GPU integrated.

I suspect that my CPU is not GPU integrated, and this caused the problem... Could somebody please tell the opinion about this. Should definitely I buy Graphics Card?

Thanks.

Replies:

Posted By: badbri
Date Posted: 14 Mar 2018 at 7:17am

Your Xeon does not include integrated graphics, so Yes you will need a video card.
https://ark.intel.com/products/88182/Intel-Xeon-Processor-E3-1230-v5-8M-Cache-3_40-GHz" rel="nofollow - https://ark.intel.com/products/88182/Intel-Xeon-Processor-E3-1230-v5-8M-Cache-3_40-GHz
Only some of the 1200 V3's have graphics, non of the 1200 series V5 or V7's do AFAIK.

Posted By: skaa
Date Posted: 14 Mar 2018 at 9:00pm

Thank you. The problem has been solved.