Ryzen 2400G No Display After BIOS Update
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8090
Printed Date: 11 Feb 2025 at 3:45am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Ryzen 2400G No Display After BIOS Update
Posted By: ZeroMaverick
Subject: Ryzen 2400G No Display After BIOS Update
Date Posted: 17 Mar 2018 at 9:20am
|
" rel="nofollow - Hey everyone, so AMD's boot kit finally came in. I installed it. Updated the BIOS on my AsRock AB350 Pro 4 (first went to 3.4 then to 4.7). I then reinstalled my 2400G and there's no display. I've tried: one stick of ram in various slots, different ram (from QVL), and even a new 2400G. Nothing. I turn on the PC, and I just get no signal. Here's what's weird: If I toss the APU AMD sent me back onto the motherboard. It boots up and brings up the UEFI right away. What the hell is going on? Please help, I'm losing my mind.
|
Replies:
Posted By: wardog
Date Posted: 17 Mar 2018 at 9:42am
|
With YOUR 2400G in her, power down, clear(not reset) the BIOS, and try rebooting. Post back please. |
Posted By: ZeroMaverick
Date Posted: 17 Mar 2018 at 9:46am
| " rel="nofollow - How do I clear the BIOS? |
Posted By: wardog
Date Posted: 17 Mar 2018 at 9:59am
|
It is covered in the Manual. |
Posted By: ZeroMaverick
Date Posted: 17 Mar 2018 at 10:08am
| " rel="nofollow - Alright. I cleared the cmos by using the jumper as indicated by the manual. Still nothing. Man, what is going on? The A6 Amd sent works just fine. Boots right into the UEFI. |
Posted By: Vathos
Date Posted: 18 Mar 2018 at 1:43am
|
I had to temporarily put in my spare dGPU ( a R7-370 ) and turn on the iGPU in the bios. It is under the last selection in the CPU under Advanced settings. Edit: It is under AMD PBS under Advanced options. ------------- AMD Forever R5-1600, R7-1800X, R5-2400G |
Posted By: ZeroMaverick
Date Posted: 18 Mar 2018 at 4:49am
" rel="nofollow -
Hmm. Okay. Maybe I'll try that. Quick question: When BIOS 4.7 wasn't giving me the results I wanted, I downloaded and installed 4.6. After that, the A6 stopped displaying also. Did I
 something up? |
Vathos wrote: