[SOLVED] Can't acces UEFI after update
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8158
Printed Date: 22 Dec 2024 at 12:13pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: [SOLVED] Can't acces UEFI after update
Posted By: jfim88
Subject: [SOLVED] Can't acces UEFI after update
Date Posted: 23 Mar 2018 at 5:35am
|
Hi! Just updated my Z170 OC Formula from 7.40 to 7.60 with the WIN utility. Now I can't acces UEFI. Screen don't show the option to push DEL and enters Windows. Tried with the Restart to UEFI 1.05 but it doesn't acces UEFI. Please help!
|
Replies:
Posted By: Xaltar
Date Posted: 23 Mar 2018 at 5:36am
|
" rel="nofollow - Have you cleared CMOS? ------------- 
|
Posted By: jfim88
Date Posted: 23 Mar 2018 at 5:37am
I tried to push Clear Cmos button with PC off and unplugged but doesn't success.
|
Xaltar wrote:Posted By: jfim88
Date Posted: 23 Mar 2018 at 5:41am
| Ok I was confused. No Clear CMOS button on this board. I was pressing Direct Key. Will jumper to clear cmos. |
Posted By: jfim88
Date Posted: 23 Mar 2018 at 5:51am
| " rel="nofollow - Put the jumper in 2-3 for 5 seconds. Now the system don?™t boot and LED shows 99 |
Posted By: Xaltar
Date Posted: 23 Mar 2018 at 6:24am
|
Disconnect the power from the system then press the power button for 5 seconds, leave it this way for 20 mins or so then reconnect power and power on again. Make sure all your devices and GPU are properly connected while you have the power disconnected. Error 99 means an error with an input/output device. You may have moved a SATA cable or something when you cleared CMOS. Let us know what happens. -------------
|
Posted By: jfim88
Date Posted: 23 Mar 2018 at 6:29am
Thanks again. Did it and will re-check in 30 minutes.
|
Posted By: jfim88
Date Posted: 23 Mar 2018 at 5:28pm
| Did it and left all night unplugged but no success, same 99 error code and system don't boot. Please help! |
Posted By: jfim88
Date Posted: 23 Mar 2018 at 5:49pm
|
Ok now it's SOLVED. Clearing CMOS put default PCIE to onboard graphic card. Plugged monitor to onboard and system boots.
|
Posted By: wardog
Date Posted: 23 Mar 2018 at 5:53pm
" rel="nofollow -
And there you have it folks http://asrock.com/support/faq.us.asp?id=334 Debug Codes of 92 - 99 Problem related to PCI-E devices. Please re-install PCI-E devices or try installing them in other slots. If the problem still exists, please remove all PCI-E devices or try using another VGA card. |
Posted By: Xaltar
Date Posted: 23 Mar 2018 at 6:29pm
Awesome, glad you got it sorted  I take it the UEFI issue is resolved too? -------------
|