X370 Taichi not post after bios update
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8182
Printed Date: 18 Jul 2025 at 5:14pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X370 Taichi not post after bios update
Posted By: kevenxia
Subject: X370 Taichi not post after bios update
Date Posted: 25 Mar 2018 at 6:07pm
|
" rel="nofollow - Hi, i just updated my bios from 3.20 to 3.30(the only change I did), but after the updating the pc can not post, it got stuck in the step 4F(Dr.Debug code).I reinstalled the memory and attempted to install only one, I also reset the bios by the switch and reinstalling the battery, but it didn't work.How can I do next?need your help, thx CPU: AMD Ryzen 7 1800 GPU: Asus Nvidia GTX 1060 Memory: Corsair DDR4 16G*2 |
Replies:
Posted By: DarthVadeRus
Date Posted: 25 Mar 2018 at 6:19pm
| " rel="nofollow - do you reset ur settings to default before updating BIOS? |
Posted By: wardog
Date Posted: 25 Mar 2018 at 6:19pm
|
Place a mb speaker on the board and boot it with the memory removed. Post back what it beeps as. FYI, NEVER clear a BIOS immediately after flashing. Only after it has rebooted to the OS or back into the BIOS. |
Posted By: kevenxia
Date Posted: 25 Mar 2018 at 7:25pm
| No, I didn't.@DarthVadeRus |
Posted By: kevenxia
Date Posted: 25 Mar 2018 at 7:37pm
Thank you very much, I will give a try.There is no mb speaker right now, I need to buy a new one.I'll post back after the speaker's delivery.
|
wardog wrote:Posted By: wardog
Date Posted: 26 Mar 2018 at 3:19am
I do this EVERY TIME before flashing. 1. Reset to Defaults 2. Save and Exit 3. Re-enter the BIOS <-IMPORTANT STEP HERE 4. Flash using Instant Flash 5. Repeat steps 1 thru 3 above immediately after flashing EDIT: add step 5 |
Posted By: kevenxia
Date Posted: 27 Mar 2018 at 8:00pm
After removing the memory, it beeps three times.
|