Intel Motherboards - No video and A2 error with X299 taichi

Print Page | Close Window

No video and A2 error with X299 taichi

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8194
Printed Date: 21 May 2024 at 5:28am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: No video and A2 error with X299 taichi

Posted By: Turny92
Subject: No video and A2 error with X299 taichi
Date Posted: 26 Mar 2018 at 5:08pm

Hi there new to ASrock.

I have a x299 taichi build with a gtx1080 and i7 7820x

I seem to come up with the error A2 which is related to IDE and sata which I have neither of only a waterblock thats powered by one

for some reason I cannot get any video, or beeps on start up and when rebooted it turns on breifly turns off then turns back on again, any help would be muchly appreciated

-------------
W3RT0

Replies:

Posted By: Turny92
Date Posted: 26 Mar 2018 at 5:11pm

Also I'm trying to get display via the display port and for storage I'm using a singular m2 drive

-------------
W3RT0

Posted By: Turny92
Date Posted: 26 Mar 2018 at 5:43pm

Also at one point it displayed b2 if this means anything to anybody. thanks

-------------
W3RT0

Posted By: wardog
Date Posted: 27 Mar 2018 at 2:08am

" rel="nofollow - Is this a computer monitor it is connected to, or a television?

If monitor, is it it set to scan all input ports or must you assign one on the monitor proper?

Attempt with an HDMI cable please.

Post back after attempting the above please.

Posted By: Turny92
Date Posted: 01 Apr 2018 at 3:36pm

" rel="nofollow - hi there I plugged in a DVI and it displayed but I tried a boot with DP and its still no go maybe installing the drivers with the DVI monitor then plugging in the DP?

-------------
W3RT0

Posted By: Turny92
Date Posted: 01 Apr 2018 at 3:37pm

sorry yes I also tried HDMI on this monitor and it didn't work I haven't tried HDMI to a TV however, I shall try installing the drivers then see how if goes sorry about the late response

-------------
W3RT0

Posted By: OraSteve
Date Posted: 19 May 2018 at 6:57pm

" rel="nofollow - Did you ever get this resolved and if so what was the root cause?

I'm have very similar issues and still getting the A2 error and no display even after clearing the CMOS and removing anything SATA related.

Any advice appreciated.

-------------
Fatal1ty Z370 Pro. Gaming i7/Intel i7 8700K/64G G. Skill DDR4-2400/SLI - 2 GeForce - 1070 G1 8G/2 Samsung PM961 MZVLW1T0HMLH/36T NAS as RAID 10/Corsair HX1000i/Cables by CableMod/Dual-loop water-mod

Posted By: kenl000
Date Posted: 09 Dec 2018 at 7:56pm

I had similiar problem with the X299 Taichi MB and a MSI GTX 1060.
I would suggest the following:
a) If you have a GTX 1080, 1070 or 1060, temporarily replace it with an older graphics card such as a GTX 570, 970, etc. The purpose behind this is to get into the UEFI BIOS.
b) Once there, go to Advance/Chipset Configuration
c) Assuming that the graphics card is in PCIE1, then change the PCIE1 Link Speed to "Gen3".
d) Now power-down and re-install the GTC 10x0 graphios card and power-up.

Other suggestions:
1) If you have say, 2 x 8GB DDR4 sticks, then they should go into C1 and D1 memory positions.
2) Upgrade the BIOS to the latest version.

Hope this helps