A320M Fail to create RAID0
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8237
Printed Date: 18 Jul 2025 at 11:19am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: A320M Fail to create RAID0
Posted By: Ridly
Subject: A320M Fail to create RAID0
Date Posted: 30 Mar 2018 at 5:19pm
|
Fail to configure raid 0 with my two SATA hdds But when press CTRL+R buttons it does nothing, it just restarts the pc after some seconds. |
Replies:
Posted By: ASRock_TSD
Date Posted: 30 Mar 2018 at 8:14pm
|
Dear Ridly, Greetings, this is ASRock TSD. We tested on A320M with two same HDDs. We can set SATA mode to [RAID mode] and press [ctrl +r] to enter RAID configuration interface properly. Then we could create RAID0 for the HDDs. Please check the test result as below pictures:      Please be notice: we recommend clearing CMOS and retrying the above steps for verifying. Thanks! All the best, ASRock TSD |