G31M-GS R2.0: where are the STANDARD CMOS settings
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=828
Printed Date: 31 Dec 2024 at 1:00am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: G31M-GS R2.0: where are the STANDARD CMOS settings
Posted By: arjaydavis
Subject: G31M-GS R2.0: where are the STANDARD CMOS settings
Date Posted: 14 Sep 2015 at 10:33pm
|
I need to be able to adjust the BIOS settings for using my PC with this KVM: http://www.startech.com/uk/Server-Management/KVM-Switches/4-Port-StarView-DVI-USB-KVM-Switch-With-Audio~SV431DVIUAGB "In STANDARD CMOS, set HALT ON ERROR to ALL BUT KEYBOARD" At the moment the PC 'hangs' in boot-up. But if I power cycle the machine a few times, it eventually gets past this and boots into Windows. So, where can I set "In STANDARD CMOS, set HALT ON ERROR to ALL BUT KEYBOARD" on the G31M-GS R2.0: where are the STANDARD CMOS settings ?
|
Replies:
Posted By: parsec
Date Posted: 15 Sep 2015 at 1:26am
|
There's no such BIOS setting in your board's BIOS. I can't think of any mother board I've used that has a BIOS setting like that. That option would affect the POST process, and is telling POST to halt on all errors except a keyboard (missing) error. A true server type board's BIOS could have an option like that. A server system without an input device would need this option to allow POST to complete. Or apparently when a KVM switch does not act like a standard keyboard during POST. StarTech is dreaming if they think all BIOS have that type of option, sorry to say. Can you manually switch this KVM to the PC with this board before you start the PC? ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|