First build - Error 46
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8334
Printed Date: 18 Jul 2025 at 10:16pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: First build - Error 46
Posted By: rebelgnome
Subject: First build - Error 46
Date Posted: 10 Apr 2018 at 7:07am
|
" rel="nofollow - This is my first PC build in over 10 years but the need to game is too much :) I've got a Fatal1ty X370 Gaming X board with a Ryzen 5 1600 CPU and 2 x G.Skill Flare X (F4-2400C15D-16GFX) They're all supposed to play nice but I'm getting an error 46 on the boards debug panel, regardless of whether I have the memory in or out? Ideas?
|
Replies:
Posted By: kerberos_20
Date Posted: 10 Apr 2018 at 12:27pm
|
Problem related to memory. Please re-install the CPU and memory then
clear CMOS. If the problem still exists, please install only one memory
module or try using other memory modules. Also make sure RAM seats properly (clicks on both sides) ------------- http://valid.x86.fr/diq4l4" rel="nofollow">  http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |
Posted By: rebelgnome
Date Posted: 11 Apr 2018 at 6:46am
|
Thanks. Yes one of the memory sticks was dead. Clearing the CMOS for other newbies... 1. Unplug power 2. Remove battery from motherboard 3. Change the CMOS jumper on the motherboard 4. Hold power button down for 15 sec 5. Wait for 15min to allow all power to discharge 6. Put the battery back in 7. Change the jumper back to it's original position 8. Power up
|