running 3466mhz ram taichi
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8388
Printed Date: 19 Jul 2025 at 10:57am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: running 3466mhz ram taichi
Posted By: datonyb
Subject: running 3466mhz ram taichi
Date Posted: 14 Apr 2018 at 11:03pm
|
its early days but i got a no frills boot into windows first try today will need to check the cold boot now gskill tridentz rgb (rgb hated here but it was cheaper) 3866 kit 8gbx2 running 3466 cl14/14/14/14/30/48 timings at 1.4 volts https://valid.x86.fr/2b55q9" rel="nofollow - https://valid.x86.fr/2b55q9 ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Replies:
Posted By: datonyb
Date Posted: 15 Apr 2018 at 6:37pm
|
well cold boot after 18ish hours worked fine so heres the timings if anyone wants some help trying to get 3466 running http://smg.photobucket.com/user/datonyb/media/3466%201.4%20volts%20first%20try_zpsrmbfrpvd.png.html" rel="nofollow">  proc odt 53ohms volts 1.4 cad bus ohms 20/20/20/20 termination block, rtt nom rzq7 / rtt wr off / rtt park rzq5 vddp volts 855 cldo vddp volts 700 mem interleaving size 512 memory interleaving channel channel interleaving hash enable i'll be trying to get some sub timings lower and the voltage a little lower over next week this is on the taichi bios version 3.1 (balls to ya new fangled pinicle whatsits  )------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: cx5
Date Posted: 16 Apr 2018 at 12:21pm
daytonb, you are so lucky !!!! 3466 is already so beyond 2666 original spec and yet able to run at CAS14 so low....... below JEDEC 2133 CAS15. SUPERB !!!! I'll be posting my partial success/failure in another post, give it a good laugh then help me out ;). ------------- x370taichi@3.50gen4 AX750 Optane900P SN770 3800x PosdonZro4 BarrowPWM-17w>420x140x28 XFX SWFT319 6900XT MSI RX560 LP to get Fluid Motion BlueskyFRC 75hz |
datonyb wrote:Posted By: datonyb
Date Posted: 17 Apr 2018 at 1:52am
|
" rel="nofollow - mate as i said in other thread i'll try and help you out with the corsair ram but its the budget crappy part of your otherwise very very nice system you have no idea how much its strangling your vega64 and speed isnt always the best results its also timings here you go watch mindblanks little demostration https://www.youtube.com/watch?v=S6yp7Pi39Z8 with vega and ram with different latencies vs speed ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: TooQik
Date Posted: 17 Apr 2018 at 8:35am
This is the best I can do to date: This is on a X370 Taichi using the 3.00 BIOS. My RAM is rated to 3200 MHz, so this is technically an overclock which I'm happy about. I can get the RAM to run at 3466 MHz with 14/14/14 timings but it's not 100% stable using HCI memtest. |
Posted By: TooQik
Date Posted: 17 Apr 2018 at 1:27pm
|
Well, after my last post I decided to check out the new version of the Ryzen DRAM Calculator, specifically version 1.1.0 beta 2, and try some of the values it produces. This new version produces values that are more compatible with my RAM and I've been able to get 3466 MHz now running with tighter timings as follows:  This is using a voltage of 1.37 in BIOS, which shows as 1.392 in HWiNFO. Now to try some further timings.  |
Posted By: cx5
Date Posted: 17 Apr 2018 at 3:03pm
|
@TooQik congratulations, keep updating us. ------------- x370taichi@3.50gen4 AX750 Optane900P SN770 3800x PosdonZro4 BarrowPWM-17w>420x140x28 XFX SWFT319 6900XT MSI RX560 LP to get Fluid Motion BlueskyFRC 75hz |