Intel Motherboards - Z370m pro4 + AIO cooler

Print Page | Close Window

Z370m pro4 + AIO cooler

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8445
Printed Date: 07 Aug 2025 at 2:26am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Z370m pro4 + AIO cooler

Posted By: Mysticfac3
Subject: Z370m pro4 + AIO cooler
Date Posted: 20 Apr 2018 at 3:53am

" rel="nofollow - Wich header on the board should I use for optimal efficiency and lowest noise possible?
And what profile in the bios?

3pin cpu for the pump and 4pin cpu for the radiator fans

or something else

Would the mentioned setting allow for constant 100% pump operation and pwm fan speed control since both connectors are on the same setting in the bios

Thanks for the support

Replies:

Posted By: ASRock_TSD
Date Posted: 20 Apr 2018 at 11:17am

" rel="nofollow -

Dear Mysticfac3,

Thank you for choosing ASRock.

Regarding your case, Z370M Pro4 doesn't have water pump header, and the two CPU fan header is controlled by the same IC.

If you want use AIO cooler, please connect the water pump to the chassis fan connector and set to full speed, and connect the 4pin CPU radiator fan to CPU 4-pin header.

Thank you!

Yours truly,

ASRock TSD