Taichi x399 - 4pin adapter?
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8637
Printed Date: 27 Sep 2024 at 2:21am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Taichi x399 - 4pin adapter?
Posted By: spoudastis
Subject: Taichi x399 - 4pin adapter?
Date Posted: 09 May 2018 at 1:36pm
|
" rel="nofollow - Hi, Im building a threadripper 1950x on a taichi x399. I have read that in addition to the 8pin 12v connector (atx12v1 slot) that the 4pin (atx12v2 slot) is required as well. I have a corsair tx850m but unfortunately it only comes with one 8pin(4x4) eps/atx12v cable, it does not have a second which I could use for the 4pin. My question is; can I use a molex to male 4pin 12v adapter for that 4pin atx12v2 slot?
|
Replies:
Posted By: wardog
Date Posted: 09 May 2018 at 2:26pm
|
" rel="nofollow - Give the adapter a whirl, but you should at this point also consider a new PSU that has the proper wiring. http://forum.asrock.com/forum_posts.asp?TID=5905&PN=2&title=x399-c0-error-code |
Posted By: spoudastis
Date Posted: 09 May 2018 at 11:15pm
|
Thanks wardog.
|
wardog wrote: