How do you delete profile from BIOS
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8647
Printed Date: 19 Jul 2025 at 8:01am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: How do you delete profile from BIOS
Posted By: MatrixStarGaming
Subject: How do you delete profile from BIOS
Date Posted: 10 May 2018 at 6:49am
| I cant figure out how to delete a profile I have saved in my bios. Profile saved under OC Tweaker on a x370 fatality mobo with update 4.60. I am.trying to reset it because CMoS wont change the saved profioe and if I run the saved profile it only runs 3/6 cores on my CPU. Thanks |
Replies:
Posted By: donalgodon
Date Posted: 10 May 2018 at 6:54am
| " rel="nofollow - Can you clear CMoS on your board via jumper and/or removing the battery? |
Posted By: MatrixStarGaming
Date Posted: 10 May 2018 at 10:00pm
|
Taking the battery out to CMoS Reset, does not reset the profiles, a CMoS reset will not remove the profiles saved in the BIOS, it just resorts the 'Current' profile to default settings as per Ryzen 1600x base specifications 3.7ghz over 6 cores. Unfortunately, upon booting into Windows 10, following the CMoS refresh it allows me to use all 6 cores using 'Current' setting that is not a save profile its just the standard base setting set in the BIOS. Ryzen Master registers the 'Current' setting with all 6 cores running at base settings but continues to pick up the profiles saved in the BIOS. In Ryzen master I can see the 'Current' setting and the two saved profiles under profiles '1 & 2', both profile 1 7 2 only run on 3/6 cores within the CPU when I look at them in Ryzen Master. The problem comes from the BIOS, When I save a profile in the BIOS, I.E. OC the CPU and then save it to a Profile, it stops using 3/6 cores on my CPU, it keeps the OC but only on 3/6 cores. This is a major issue because I want to save profiles and use them but I want to use all of the 6/6 cores O'Clocked. When I boot into the BIOS, I can not delete or edit any of the settings and then boot back into Windows running on all cores, when I boot into Ryzen Master 3/6 cores are deactivated. I need to know how to reset defaults in profiles/delete profiles/remove 3 core limitation, created in the BIOS so that I can alter my Ryzen Mater settings i.e. on all 6/6 cores across all profiles. Furthermore, I had to run a CMoS reset just to get my current stock settings to run under 'Current' profile until I know how to remove profiles in the BIOS. Hope this makes sense. :-)
|
Posted By: datonyb
Date Posted: 11 May 2018 at 1:28am
|
" rel="nofollow - its hard reading for sure right so it automatically sets a profile, or............ you can clear cmos and reset defaults and it will stay that way unless you alter anything in bios ? if so great easy peasey you have an issue with the bios and i suggest you reset defaults and go directly to a nice new bios flash ,even if the same file version (but a fresh download) problem solved new bios will clear all profiles, and whatever is mucking up in the bios flash will be fixed in a reflash ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |