Intel Motherboards - asrock fatality Z97X Killer

Print Page | Close Window

asrock fatality Z97X Killer

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=870
Printed Date: 08 Sep 2024 at 10:50am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: asrock fatality Z97X Killer

Posted By: norm19
Subject: asrock fatality Z97X Killer
Date Posted: 22 Sep 2015 at 12:24am

Hi everybody I have just joined the site. I am trying to do my first build but have problems from the start.

I want to do a trial build just out of the box . The motherboard is a asrock fatality Z97X Killer series

using an intel core i7- 4790k LGA 1150 processor ,THE power supply is a EVGA supernova NEX750b

Ram G.Skill ARES 16GB.

I have installed the ram, installed the processor and heat sink, Attached a monitor and that is all so far

From the power supply I connect the 24 pin connector to the motherboard then I connected the 8 pin cpu connector to the motherboard, short the power switch on motherboard the CPU fan starts and shorts straight away, When I disconnect the 8 pin cpu connector short the switch again the fan now runs continuously, I have also tried another power supply same thing happens, can someone please help me out as to what is going on

regards

norm19

-------------
n.stark